Parts for old chevy's in Canada - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jon Scully · 01-27-2011, 01:28 PM

Hello There,

New to the site, and hoping to get a thread going for the canadians looking to find, trade ect parts--new used whatever-- Just tell us where your from, and where you buy parts, new used whatever.....

To get her going I just fouind this site-- Lots of stuff-- but a little pricey for my liking:

http://www.billstruckshop.com/67-72used.html

Also-- I buy most of my new parts at a local NAPA dealer,

Look forward to hearing from others:

Jon
Thunder Bay
Ontario Canada

cvalcore · 01-28-2011, 03:18 AM

ya ive seen that site before wise i could get what he's asking for parts out of mine i would sell everthing.

Gibber1967 · 01-28-2011, 11:03 AM

I've spoke with this guy on the phone, but hagven't bought anything from him yet. I need door seals, drip catchers and rear seat hold downs and it looks like LMC is the cheapest place. Anyone buy from Cananda buy from them.....how did you find it and di you pay any extra duties etc. at the border?

http://www.scottssupertrucks.com/

Gibber

1956cameo · 01-28-2011, 01:20 PM

You can get new parts way cheaper at "Classic Trucks" and "The Truck Shop", than you can from LMC.

Jon Scully · 01-28-2011, 03:16 PM

@ 1956cameo-- Do you have links to websites for these stores....or they only catalogues....
Thanks,
Jon

Gibber1967 · 01-28-2011, 03:26 PM

I haven't looked at either one of these, but they are book marked now. Thanks for the info.!

I think these are the links mentioned in the post above.

http://www.classicparts.com/

http://www.truckandcarshop.com/6072.html

Gibber

1956cameo · 01-28-2011, 06:15 PM

Those are the right links! Every now and then I will see an ad for classic parts here on the forum. The truck shop doesn't support the sight, but overall they have the best prices that I have seen. Good luck!

YBNORML · 01-28-2011, 07:15 PM

I have ordered from LMC, Once. I will never do it again, i bought a cover for my 4-door and cost about $100.00 with shipping it cost $160.00. I was not impressed.

Gibber1967 · 01-29-2011, 04:38 AM

That's what I was worried about with LMC. Scotts in Calgary has all the same stuff, but he's 30% more expensize. Still less that 60% more if you get stuck with a bunch of duty and other BS.

Gibber

mustardjimmy71 · 01-29-2011, 05:20 AM

When you call scotts you actually talk to scott. He seemed quite knowlegeable. if he doesnt have it he knows who will. Greyhound charges oversided for bumpers. that was expensive. Imo dealing with the Canadian border is a pita. Good experience with scott

PHAT TONY · 01-29-2011, 01:47 PM

I like Scott; he's just a guy scrapping up a living at what he likes, and he's 12 mins away.

Gibber1967 · 01-29-2011, 02:14 PM

Well if you are ever heading out to BC let me know and I'l get you to bring some stuff with you. I need to get a few things before spring and I thing after this thread I'll use Scott's. I talked to him too a while back, he was very knowledgable and did sound like a good guy.

Gibber

mustardjimmy71 · 02-19-2011, 03:49 PM

http://www.kmstools.com/ locations in bc and alberta

Jon Scully · 02-19-2011, 04:09 PM

Thanks for the info guys-- I hope to continue building this thread... it is a good resource for us Canadians eh?

I have also had good luck talking to Partsource here in thunder bay-- I was quite surprised-- If thye do not have it in stock- they can get it, and for the same price as LMC (i.e- lock sets, interior parts, swiches and light hosungs). Not sure of blzer specific stuff yet...but we ll see.

ALSO-- How about body-patch panels? any good canadian suppliers? I have not looked for these yet...

01-27-2011, 01:28 PM	#1
Jon Scully Registered User Join Date: Jan 2011 Location: Thunder Bay Ontario Posts: 97	Parts for old chevy's in Canada Hello There, New to the site, and hoping to get a thread going for the canadians looking to find, trade ect parts--new used whatever-- Just tell us where your from, and where you buy parts, new used whatever..... To get her going I just fouind this site-- Lots of stuff-- but a little pricey for my liking: http://www.billstruckshop.com/67-72used.html Also-- I buy most of my new parts at a local NAPA dealer, Look forward to hearing from others: Jon Thunder Bay Ontario Canada

01-28-2011, 03:18 AM	#2
cvalcore Registered User Join Date: Oct 2008 Location: Monroe IA Posts: 272	Re: Parts for old chevy's in Canada ya ive seen that site before wise i could get what he's asking for parts out of mine i would sell everthing.

01-28-2011, 11:03 AM	#3
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Parts for old chevy's in Canada I've spoke with this guy on the phone, but hagven't bought anything from him yet. I need door seals, drip catchers and rear seat hold downs and it looks like LMC is the cheapest place. Anyone buy from Cananda buy from them.....how did you find it and di you pay any extra duties etc. at the border? http://www.scottssupertrucks.com/ Gibber

01-28-2011, 01:20 PM	#4
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Parts for old chevy's in Canada You can get new parts way cheaper at "Classic Trucks" and "The Truck Shop", than you can from LMC. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-28-2011, 03:16 PM	#5
Jon Scully Registered User Join Date: Jan 2011 Location: Thunder Bay Ontario Posts: 97	Re: Parts for old chevy's in Canada @ 1956cameo-- Do you have links to websites for these stores....or they only catalogues.... Thanks, Jon

01-28-2011, 03:26 PM	#6
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Parts for old chevy's in Canada I haven't looked at either one of these, but they are book marked now. Thanks for the info.! I think these are the links mentioned in the post above. http://www.classicparts.com/ http://www.truckandcarshop.com/6072.html Gibber

01-28-2011, 06:15 PM	#7
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Parts for old chevy's in Canada Those are the right links! Every now and then I will see an ad for classic parts here on the forum. The truck shop doesn't support the sight, but overall they have the best prices that I have seen. Good luck! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-28-2011, 07:15 PM	#8
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Parts for old chevy's in Canada I have ordered from LMC, Once. I will never do it again, i bought a cover for my 4-door and cost about $100.00 with shipping it cost $160.00. I was not impressed. __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

01-29-2011, 04:38 AM	#9
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Parts for old chevy's in Canada That's what I was worried about with LMC. Scotts in Calgary has all the same stuff, but he's 30% more expensize. Still less that 60% more if you get stuck with a bunch of duty and other BS. Gibber

01-29-2011, 05:20 AM	#10
mustardjimmy71 toys'r'us Join Date: Nov 2010 Location: Penticton, BC, Canada Posts: 347	Re: Parts for old chevy's in Canada When you call scotts you actually talk to scott. He seemed quite knowlegeable. if he doesnt have it he knows who will. Greyhound charges oversided for bumpers. that was expensive. Imo dealing with the Canadian border is a pita. Good experience with scott

01-29-2011, 01:47 PM	#11
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: Parts for old chevy's in Canada I like Scott; he's just a guy scrapping up a living at what he likes, and he's 12 mins away. __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

01-29-2011, 02:14 PM	#12
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Parts for old chevy's in Canada Well if you are ever heading out to BC let me know and I'l get you to bring some stuff with you. I need to get a few things before spring and I thing after this thread I'll use Scott's. I talked to him too a while back, he was very knowledgable and did sound like a good guy. Gibber

02-19-2011, 03:49 PM	#13
mustardjimmy71 toys'r'us Join Date: Nov 2010 Location: Penticton, BC, Canada Posts: 347	Re: Parts for old chevy's in Canada http://www.kmstools.com/ locations in bc and alberta

02-19-2011, 04:09 PM	#14
Jon Scully Registered User Join Date: Jan 2011 Location: Thunder Bay Ontario Posts: 97	Re: Parts for old chevy's in Canada Thanks for the info guys-- I hope to continue building this thread... it is a good resource for us Canadians eh? I have also had good luck talking to Partsource here in thunder bay-- I was quite surprised-- If thye do not have it in stock- they can get it, and for the same price as LMC (i.e- lock sets, interior parts, swiches and light hosungs). Not sure of blzer specific stuff yet...but we ll see. ALSO-- How about body-patch panels? any good canadian suppliers? I have not looked for these yet...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.