DIY4x FGB52 kit question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLACK AND BLUE 67-72 · 02-14-2011, 06:29 PM

Any of you guys that have used this kit on a 2wd to convert it to a 4wd, how did you locate the position for the rear spring hanger? Does one of the bolts go through the bottom of the front cab mount where the rivet was, or just in front of it?

BLACK AND BLUE 67-72 · 02-15-2011, 07:28 PM

Anybody???????

**leddzepp** · 02-15-2011, 07:47 PM

moving to 4wd area...hopefully someone here has your answer.
Posted via Mobile Device

bikes&bowties · 02-16-2011, 01:01 AM

I dint quite understand your question. I just measured from the front of the frame for the shackle eye hole.
Posted via Mobile Device

woodwright · 02-16-2011, 04:53 AM

Have you called Kert at DIY4X? He's pretty helpful.

duallyjams · 02-16-2011, 08:38 AM

Yes the front cab mount needs to be trimmed.

BLACK AND BLUE 67-72 · 02-19-2011, 03:59 PM

So one hole is actually lined up with the old rivet hole in the lower part of the front cab mount then? What about the front hanger does it just bolt on where the old mount was, or does it need to be relocated and holes drilled?

duallyjams · 02-19-2011, 06:15 PM

The front spring mount and the core support are welded as one so the core support stays in the same location.

royo · 02-19-2011, 06:42 PM

Quote:

Originally Posted by woodwright

Have you called Kert at DIY4X? He's pretty helpful.

Do this he can tell you

02-14-2011, 06:29 PM	#1
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	DIY4x FGB52 kit question Any of you guys that have used this kit on a 2wd to convert it to a 4wd, how did you locate the position for the rear spring hanger? Does one of the bolts go through the bottom of the front cab mount where the rivet was, or just in front of it? __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

02-15-2011, 07:28 PM	#2
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: DIY4x FGB52 kit question Anybody??????? __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

02-15-2011, 07:47 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Re: DIY4x FGB52 kit question moving to 4wd area...hopefully someone here has your answer. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-16-2011, 01:01 AM	#4
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: DIY4x FGB52 kit question I dint quite understand your question. I just measured from the front of the frame for the shackle eye hole. Posted via Mobile Device

02-16-2011, 04:53 AM	#5
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: DIY4x FGB52 kit question Have you called Kert at DIY4X? He's pretty helpful. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

02-16-2011, 08:38 AM	#6
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: DIY4x FGB52 kit question Yes the front cab mount needs to be trimmed. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-19-2011, 03:59 PM	#7
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: DIY4x FGB52 kit question So one hole is actually lined up with the old rivet hole in the lower part of the front cab mount then? What about the front hanger does it just bolt on where the old mount was, or does it need to be relocated and holes drilled? __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

02-19-2011, 06:15 PM	#8
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: DIY4x FGB52 kit question The front spring mount and the core support are welded as one so the core support stays in the same location. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.