Hydraulic jack question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevLoRay · 01-19-2011, 12:12 AM

I have a Craftsman 1 1/2-ton floor jack that I bought in '82. I believe the seals are now bad in the pump. Sears doesn't list it in their parts system anymore. This jack was built in Japan, so I have faith that there are parts to do repairs, so just looking for anyone who may have any experience with these jacks.

(Mods, if this needs to go to another forum, have at it. I didn't find one that looked good)

**LockDoc** · 01-19-2011, 02:10 AM

-
I have a catalog and bought some parts from here...

http://www.hydjack.com/

Just call their tech line.

What is your Model Number?

LockDoc

ChevLoRay · 01-19-2011, 03:45 PM

Thanks. I sent them an email with the catalog nr from my jack, to see if they have any parts info. Appreciate the link.

Lee H · 01-20-2011, 07:51 AM

Check out a hydraulic pump service in you area. They can rebuild that thing at a reasonable cost.

ChevLoRay · 02-02-2011, 12:39 AM

The link that was sent, never did produce any information. It's as if they don't care.

**truckdude239** · 02-23-2011, 12:32 AM

just sounds like it is time for a new jack to me i couldn't take a chance on rebuilding an old jack

cdowns · 02-23-2011, 06:29 AM

i'd buy new, better more up to date features available now

*Shane* · 02-23-2011, 12:07 PM

go on over to www.garagejournal.com and do a search ... there is a guy there that specializes in rebuilding those jacks ...

cableguy0 · 02-23-2011, 07:37 PM

Its probably cheaper to buy a brand new 3 ton than it is to rebuild an old 1.5 ton. You should be using a 3 ton anyhow if your picking up truck and heavy vehicles.

01-19-2011, 12:12 AM	#1
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Hydraulic jack question I have a Craftsman 1 1/2-ton floor jack that I bought in '82. I believe the seals are now bad in the pump. Sears doesn't list it in their parts system anymore. This jack was built in Japan, so I have faith that there are parts to do repairs, so just looking for anyone who may have any experience with these jacks. (Mods, if this needs to go to another forum, have at it. I didn't find one that looked good) __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-19-2011, 02:10 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: Hydraulic jack question - I have a catalog and bought some parts from here... http://www.hydjack.com/ Just call their tech line. What is your Model Number? LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 01-19-2011 at 02:29 AM.

01-19-2011, 03:45 PM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Hydraulic jack question Thanks. I sent them an email with the catalog nr from my jack, to see if they have any parts info. Appreciate the link. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-20-2011, 07:51 AM	#4
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Hydraulic jack question Check out a hydraulic pump service in you area. They can rebuild that thing at a reasonable cost. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

02-02-2011, 12:39 AM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Hydraulic jack question The link that was sent, never did produce any information. It's as if they don't care. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-23-2011, 12:32 AM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Hydraulic jack question just sounds like it is time for a new jack to me i couldn't take a chance on rebuilding an old jack __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

02-23-2011, 06:29 AM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Hydraulic jack question i'd buy new, better more up to date features available now __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

02-23-2011, 12:07 PM	#8
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Hydraulic jack question go on over to www.garagejournal.com and do a search ... there is a guy there that specializes in rebuilding those jacks ...

02-23-2011, 07:37 PM	#9
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: Hydraulic jack question Its probably cheaper to buy a brand new 3 ton than it is to rebuild an old 1.5 ton. You should be using a 3 ton anyhow if your picking up truck and heavy vehicles. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.