Bagged and chopped 68 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged68chevy · 03-07-2011, 02:08 AM

Hey I noticed u have pancaked your crossmember id like to see a bunch of pics with steering and everything done
Posted via Mobile Device

bagged68chevy · 03-09-2011, 01:42 AM

The latest!!!!!!!!!

Andy4639 · 03-13-2011, 06:19 AM

That is a sweet shot right there!

bagged68chevy · 03-15-2011, 12:13 AM

thanks truck is comin along good

**67cheby** · 03-15-2011, 11:26 AM

i typically hate chopped tops on these trucks...that being said i think yours looks KILLER, i love the look , nice work keep it up

bagged68chevy · 03-15-2011, 11:51 AM

Thanks thats wat most people are saying and thats wat i wanna hear.....i wanted a suttle chop.

YBNORML · 04-05-2012, 08:24 PM

Quote:

Originally Posted by bagged68chevy

The latest!!!!!!!!!

Very cool, a mod that I have not seen before! I like it

VA72C10 · 03-09-2011, 02:02 AM

Very nice! I shaved my cowl and was going to continue the hood center ridge on my last build but never got around to it

Looks great!!!

FRENCHBLUE72 · 03-09-2011, 08:51 PM

Most of my stuff is in the build thread and I still have not actually drove the truck so I cant say what would work and what would not?

crazy longhorn · 03-09-2011, 09:14 PM

You gotta love a good chop

crazyL

bagged68chevy · 03-11-2011, 01:06 AM

thanks for the comments guys keep them coming and any tips advice or ideas are always welcome..............please check out my brothers super short 4x4 ls6 build

http://67-72chevytrucks.com/vboard/s....php?p=4542829

FRENCHBLUE72 · 03-11-2011, 09:49 AM

You got any info on how you stretched the hood line?

bagged68chevy · 03-11-2011, 11:32 AM

1 inch steel cut and ground down and welded on

FRENCHBLUE72 · 03-11-2011, 11:36 AM

I was thinking you used a donar hood??? Heres a few pics of the same mod I saw at last years portland roadster show..

bagged68chevy · 03-11-2011, 02:06 PM

When do u plan on having ur truck drivable?
Posted via Mobile Device

FRENCHBLUE72 · 03-11-2011, 02:29 PM

As soon as the economy comes back hahahhahahaa

FRENCHBLUE72 · 03-18-2011, 10:21 AM

I would venture to guess that the fenders are welded on..

bagged68chevy · 03-18-2011, 11:00 AM

Yep all welded up, looks great but someone gonna die if they plow into it lol!!!!!!!!!

**67cheby** · 03-18-2011, 11:34 AM

on the upside i guess you wont have to worry about getting your gaps back right when you dissassemble for paint !!! LOL, saving one big headache , no more adjusting !!

bagged68chevy · 03-18-2011, 02:06 PM

Lol and if it gets wrecked ill be doin time so i wont have to worry about fixin it!!!!!! Lol

nuke1 · 03-18-2011, 04:07 PM

Sweet truck!! what kind of hinges did you use?

bagged68chevy · 03-18-2011, 04:11 PM

they are late 70's jeep wagoneer hinges

tackybuzzard · 03-31-2011, 08:24 PM

chop really looks great. how much did you actually take out.

bagged68chevy · 04-01-2011, 12:05 PM

2" out of the rear to make the rear glass level with side glass leaned the pillars back till i like the look and it ended up about 3"

bagged68chevy · 04-05-2012, 06:35 PM

377

View Poll Results: FOREST SERVICE GREEN OR CLEAN WHITE?
GREEN	31	46.27%
WHITE	36	53.73%
Voters: 67. You may not vote on this poll

03-07-2011, 02:08 AM	#1
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 Hey I noticed u have pancaked your crossmember id like to see a bunch of pics with steering and everything done Posted via Mobile Device

03-09-2011, 01:42 AM	#2
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 The latest!!!!!!!!! Attached Images

03-13-2011, 06:19 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Bagged and chopped 68 That is a sweet shot right there! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-15-2011, 12:13 AM	#4
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 thanks truck is comin along good

03-15-2011, 11:26 AM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Bagged and chopped 68 i typically hate chopped tops on these trucks...that being said i think yours looks KILLER, i love the look , nice work keep it up __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-15-2011, 11:51 AM	#6
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 Thanks thats wat most people are saying and thats wat i wanna hear.....i wanted a suttle chop.

03-09-2011, 02:02 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Bagged and chopped 68 Very nice! I shaved my cowl and was going to continue the hood center ridge on my last build but never got around to it Looks great!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-09-2011, 08:51 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bagged and chopped 68 Most of my stuff is in the build thread and I still have not actually drove the truck so I cant say what would work and what would not? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-09-2011, 09:14 PM	#10
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Bagged and chopped 68 You gotta love a good chop crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

03-11-2011, 01:06 AM	#11
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 thanks for the comments guys keep them coming and any tips advice or ideas are always welcome..............please check out my brothers super short 4x4 ls6 build http://67-72chevytrucks.com/vboard/s....php?p=4542829

03-11-2011, 09:49 AM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bagged and chopped 68 You got any info on how you stretched the hood line? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-11-2011, 11:32 AM	#13
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 1 inch steel cut and ground down and welded on

03-11-2011, 11:36 AM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bagged and chopped 68 I was thinking you used a donar hood??? Heres a few pics of the same mod I saw at last years portland roadster show.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-11-2011, 02:06 PM	#15
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 When do u plan on having ur truck drivable? Posted via Mobile Device



Register or Log In To remove these advertisements.

03-11-2011, 02:29 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bagged and chopped 68 As soon as the economy comes back hahahhahahaa __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-18-2011, 10:21 AM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bagged and chopped 68 I would venture to guess that the fenders are welded on.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-18-2011, 11:00 AM	#18
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 Yep all welded up, looks great but someone gonna die if they plow into it lol!!!!!!!!! Last edited by bagged68chevy; 03-18-2011 at 11:00 AM.

03-18-2011, 11:34 AM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Bagged and chopped 68 on the upside i guess you wont have to worry about getting your gaps back right when you dissassemble for paint !!! LOL, saving one big headache , no more adjusting !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-18-2011, 02:06 PM	#20
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 Lol and if it gets wrecked ill be doin time so i wont have to worry about fixin it!!!!!! Lol

03-18-2011, 04:07 PM	#21
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Bagged and chopped 68 Sweet truck!! what kind of hinges did you use? __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-18-2011, 04:11 PM	#22
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 they are late 70's jeep wagoneer hinges

03-31-2011, 08:24 PM	#23
tackybuzzard Registered User Join Date: Feb 2006 Location: Pilot Point,TX Posts: 6	Re: Bagged and chopped 68 chop really looks great. how much did you actually take out.

04-01-2011, 12:05 PM	#24
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 2" out of the rear to make the rear glass level with side glass leaned the pillars back till i like the look and it ended up about 3" Attached Images Last edited by bagged68chevy; 04-15-2011 at 12:35 AM.

04-05-2012, 06:35 PM	#25
bagged68chevy Registered User Join Date: Feb 2011 Location: klamath falls or Posts: 102	Re: Bagged and chopped 68 377 Attached Images

Register or Log In To remove these advertisements.