The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-08-2003, 09:57 PM   #1
tim m
Registered User
 
Join Date: Mar 2001
Location: Gilbert Az
Posts: 286
Stereo Question

My C-D player quit working in my unit, I went and bought a new Alpine deck. Awhile after I installed it I started to get an itermittent buzz in the speakers. Everyone told me it was a grounding problem, so I rewired everything through doors to the unit I drill and tapped the fram for my ground straps and everything would work fine for a while. Then it would always come back. Now it is worse then ever, but it only does it while the engine is running. Does anyone have any ideas waht I should do next. Could it be my amp, speakers?
__________________
1970 k10
1971 C10
Gilbert Az
tim m is offline   Reply With Quote
Old 07-08-2003, 10:14 PM   #2
Dean23
68cst_ss490
 
Dean23's Avatar
 
Join Date: May 2001
Location: edmonton,canada
Posts: 1,363
is it possible the alt is going the rectifier in an alt will cause a humm through the radio sometimes
__________________
Dean
edmonton,canada
a winter wonderland
2005 Chevrolet Avalanche LT
cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers.

http://www.cardomain.com/ride/3090973
Dean23 is offline   Reply With Quote
Old 07-08-2003, 10:17 PM   #3
ckenwright
Registered User
 
ckenwright's Avatar
 
Join Date: May 2003
Location: Phoenix, AZ
Posts: 104
First of all, the sound you hear is your alternator whine coming through your speakers. This is usually fixed by putting a larger ground or affixing the ground on the head unit you already have better. Usually the better stereos have what you call a floating ground and grounding the negative speaker wires will destroy your head unit. If it does not have a floating ground you can ground the negative speaker wires and that may fix the problem. Before you do this make sure. Don't take a chance. I recommend you take the negative wire from the radio and ground it straight to the interior frame. From there make sure that all your grounds including the battery and cab are good.
ckenwright is offline   Reply With Quote
Old 07-08-2003, 10:18 PM   #4
ckenwright
Registered User
 
ckenwright's Avatar
 
Join Date: May 2003
Location: Phoenix, AZ
Posts: 104
You could also buy a little filter and hook it up in front of your stereo on the positive and negative lead.
ckenwright is offline   Reply With Quote
Old 07-08-2003, 10:18 PM   #5
wnc mountain
More hobbies than money!
 
wnc mountain's Avatar
 
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
Check the groung from the battery to the frame. Check the ground on the amp, if I where to guess that would be my first. Also check the block to frame grounding strap. Also is you amp powered directly from the battery, should be with a fuse? Have you upgraded your altanater(sp)?
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets.
'70 GMC lwb 350/350 ps,pb
'72 c-10 lwb 350/350 a/c, ps, pb
'72 Blazer project
wnc mountain is offline   Reply With Quote
Old 07-08-2003, 10:21 PM   #6
wnc mountain
More hobbies than money!
 
wnc mountain's Avatar
 
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
do not ground speaker wires on am alpine head or from an amp. You will cause damage to the system, most units these days should not be wired that way.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets.
'70 GMC lwb 350/350 ps,pb
'72 c-10 lwb 350/350 a/c, ps, pb
'72 Blazer project
wnc mountain is offline   Reply With Quote
Old 07-08-2003, 11:08 PM   #7
Green72GMC
Registered User
 
Green72GMC's Avatar
 
Join Date: Apr 2003
Location: Deville, Louisiana
Posts: 293
My friends Bronco did the same exact thing, he said it part of his coil going out, it would make the noise when running, it was funny because it would whine more high pitched and louder the faster he went.
__________________
1972 GMC SWB, 305 powered
1980 diesel VW pickup, Needs a Heart Transplant
1997 Toyota Taco

The Second Amendment is in place incase they ignore the
others.
Green72GMC is offline   Reply With Quote
Old 07-09-2003, 12:47 AM   #8
miket
Registered User
 
miket's Avatar
 
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
You didn't say if you were running an external amp...if you are the RCA's need to stay away from any other wiring in the car...if you are using the amp in the head unit then I would agree with what has already been said.
__________________
FocuzTech Performance


Evergreen Protective Coatings
Gatorhyde...the best kept secret in spray in bed lining & protection
miket is offline   Reply With Quote
Old 07-09-2003, 08:05 AM   #9
tim m
Registered User
 
Join Date: Mar 2001
Location: Gilbert Az
Posts: 286
I am running an external amp. I havedone all the grounding. I drilled and tapped my frame for the ground straps. Ran seperate wires for each unit, but I did ty them all in to a single point.
__________________
1970 k10
1971 C10
Gilbert Az
tim m is offline   Reply With Quote
Old 07-09-2003, 08:08 AM   #10
Wreck
Registered User
 
Join Date: May 2003
Location: Paris, TX
Posts: 60
you can buy a inline noise filter that will cure your prob..(fits between your outputs on the head unit and the inputs of an amp) they are not that expesive..I have had to do that with a couple vehicles.
Wreck is offline   Reply With Quote
Old 07-09-2003, 11:32 AM   #11
miket
Registered User
 
miket's Avatar
 
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
Tim,

I just finished installing my system in my 94 caprice and am running two amps in the trunk...I use high end phoenix gold RCA connect cables from the head unit all the way to the trunk. from my experience doing this in 2-3 cars, if the RCA patch cables (even the good ones) get installed or are routed anywhere near other wires (especially power), then the low current signal thats passed through the RCA's will be suspect to interference. I made a valiant attempt during this last install to keep them away and routed seperately from everything else and it worked great.
__________________
FocuzTech Performance


Evergreen Protective Coatings
Gatorhyde...the best kept secret in spray in bed lining & protection
miket is offline   Reply With Quote
Old 07-09-2003, 11:55 AM   #12
NSANE68!!!
SLICER AND DICIER
 
NSANE68!!!'s Avatar
 
Join Date: May 2001
Location: Quuen Creek
Posts: 1,383
Yep POWER on one side of the cab, and patch cords, speaker wire ect., on the other.
__________________
01 Tahoe 22's 2/4 drop and tv's
68 chevy money pit
51 chevy belair
95 Honda 900RR
05 GMC Siearra (company truck)
NSANE68!!! is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com