![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Kill Bill...et
Join Date: Aug 2008
Location: Winchestertonfieldville, Wa
Posts: 366
|
Re: Attention All Air Baggers..
So this may be a newb question, but the e-bay panel looks like the dumps are T'd (unless these are the lines in from tank, but if that's the case then where's the dump), then there's individual fills for each bag, but where's the fitting to go to the valves from the tank. Something tells me the answer is gonna make me feel dumb.
![]() Last edited by stevencvn72; 03-01-2011 at 07:31 PM. Reason: Here's a pic for my dumbness. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: Attention All Air Baggers..
It says only one airline into the panel then 1 line to each bag.......Kieth
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Aug 2008
Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!!
Posts: 883
|
Re: Attention All Air Baggers..
The way i done my set up was run the line from the tank to under the dash to a tee fitting. From the tee fitting i ran a couple inch long air line to my pressure switch and another line to yet another tee fitting and the remaining two lines to the two bottom feed lines on the back of the paddles. The upper four fittings on the paddles will supply each of your four air bags. If your pressure switch is on the tank you will only use one tee.
__________________
Down......with the sickness!! Last edited by crawdadfox; 03-01-2011 at 07:46 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|