tow rating - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 07-08-2003, 01:11 PM

what is the tow rating for a 67 c20? 4:11 rear and 327 if it matters. i need to pull a skid loader upon occasion and wondered if she's up to it. what hitch works good w/ our trucks?

mtdave2 · 07-08-2003, 02:30 PM

here ya go

landon4421 · 07-08-2003, 02:58 PM

I don't know how much the skid loader weights but my '72 would pull my buddy robs scout up to hollister hills with no problum and the is a pritty decent hill to climb up to get there.

landon4421 · 07-08-2003, 03:02 PM

Almost forgot. At the time it was pulling the scout in the pic, It had a 350/350/205, 1/2 ton springs and dana 60 front and 14 bolt in the rear. I had pulled it up there like 30 times before with the stock 1/2 ton axles under it. I would say you should be fine pulling the skid loader. Just make sure you hitch is installed right. Good luck, Landon

bucket · 07-08-2003, 03:10 PM

thanks guys! has anyone installed a class 4 hitch? if so, do any of them fit better than others? bolt up to existing holes vs. drilling frame?

Longhorn Man · 07-09-2003, 07:20 PM

Mine hangs low, and had to drill holes. No idea of the make nor model, it is pretty old.

07-08-2003, 01:11 PM	#1
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	tow rating what is the tow rating for a 67 c20? 4:11 rear and 327 if it matters. i need to pull a skid loader upon occasion and wondered if she's up to it. what hitch works good w/ our trucks?

07-08-2003, 02:30 PM	#2
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	here ya go Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

07-08-2003, 02:58 PM	#3
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I don't know how much the skid loader weights but my '72 would pull my buddy robs scout up to hollister hills with no problum and the is a pritty decent hill to climb up to get there. Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

07-08-2003, 03:02 PM	#4
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Almost forgot. At the time it was pulling the scout in the pic, It had a 350/350/205, 1/2 ton springs and dana 60 front and 14 bolt in the rear. I had pulled it up there like 30 times before with the stock 1/2 ton axles under it. I would say you should be fine pulling the skid loader. Just make sure you hitch is installed right. Good luck, Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

07-08-2003, 03:10 PM	#5
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	thanks guys! has anyone installed a class 4 hitch? if so, do any of them fit better than others? bolt up to existing holes vs. drilling frame?

07-09-2003, 07:20 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Mine hangs low, and had to drill holes. No idea of the make nor model, it is pretty old.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.