Need some blazer measurements

[skunkwerx]

Can someone help me with some measurements?what is the over all lenth from the front of the fender to the back of the bedside, and the wheel base, center of the front wheel to the center of the rear wheel. Thanks for any of this info
Posted via Mobile Device

[kd71jimmy]

I can measure mine tomorrow...at work tonight, until 5AM...

[Bentblazer]

http://www.gmheritagecenter.com/gm-h...let-Blazer.pdf
Might try this link, not sure of the series though. This was posted farther down.

[skunkwerx]

Thanks, for got to mention, I need them for 69-72
Posted via Mobile Device

[Burt4x4]

Wheel base is 104" that's why they wheel like a billy goat
Duno about the body but I will try and rember tonight to put a tape on it

[Erik V]

173.5 from the front side of the fender to the rearmost sheetmetal on the back. Measured along the body contour just above the door handle. With the point of the hood being slightly farther forward, and the front bumper protruding beyond that 173.5 as well.

Erik

[skunkwerx]

Thanks for the info, now I know where to start
Posted via Mobile Device

[Erik V]

Accounting for body-overhang on both vehicles, I'm amazed that my "econobox-pocket rocket" is nearly the same length as the Jimmy. Wheelbase is identical between them too, where the Jimmy's overhang is in the back, the Neon's is split front and back. Both are spaced fairly equally off the garage doors.

Lemme know if you need more precise measurements.

Erik

[mustardjimmy71]

thats some good patina