brad2 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brad2 · 07-09-2003, 10:34 PM

2

lbbdoc · 07-09-2003, 10:47 PM

how much was the air ride with instalation

Ric83 · 07-09-2003, 11:30 PM

Man, everytime I look at it again I still drool. That looks so sweet.
Not to change the topic, but what is the status with the Jimmy??

Ric

highboy_04 · 07-10-2003, 12:51 AM

thanks for the pics. that looks awesome!

Prerunner1982 · 07-10-2003, 01:32 AM

once again, i was wrong.... user name fits.... like always!

bagged81 · 07-10-2003, 08:27 AM

What year car it that LT1 out of?
How much of a PITA is the wiring?

brad2 · 07-10-2003, 03:50 PM

I already had a lot of the air ride stuff that I pulled off the jimmy. I bought the four link and tapered bags for the rear. As far as labor I get billed for a week at a time and it is not broken down as to what each hour is for. So basically I can't put a specific dollar amount on it.

The engine is a 95 and only had a few miles on it when I got it in 96. I don't think it has more than 7 or 8,000 miles on it right now. The wireing harness from the car was used and modified so it was a PITA. To do it again I would just buy a harness made for the swap.

brad2 · 07-10-2003, 03:53 PM

Here is some of the recent work on the Jimmy. The floors had to have some massageing due to the new frame. Nothing will hang below the frame rail either.

brad2 · 07-10-2003, 03:54 PM

2

brad2 · 07-10-2003, 03:55 PM

The bumpers are being narrowed and sectioned.

bagged81 · 07-10-2003, 04:10 PM

Quote:

Originally posted by brad2
The engine is a 95 and only had a few miles on it when I got it in 96

I bet that cost a pretty penny. I did not even know that a converion harnass is avaliable for it, thats cool.

Looks like some good craftsmanship on the Jimmy.

07-09-2003, 10:34 PM	#26
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	2 Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-09-2003, 11:30 PM	#28
Ric83 Registered User Join Date: Jan 2003 Location: Austin, TX Posts: 824	Man, everytime I look at it again I still drool. That looks so sweet. Not to change the topic, but what is the status with the Jimmy?? Ric __________________ Ric '83 Silverado SWB Fleetside Here she is

07-10-2003, 12:51 AM	#29
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	thanks for the pics. that looks awesome! __________________ '67 c10 350/th350

07-10-2003, 01:32 AM	#30
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	once again, i was wrong.... user name fits.... like always! __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

07-10-2003, 08:27 AM	#31
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	What year car it that LT1 out of? How much of a PITA is the wiring? __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

07-09-2003, 10:47 PM	#27
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	how much was the air ride with instalation

07-10-2003, 03:50 PM	#32
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	I already had a lot of the air ride stuff that I pulled off the jimmy. I bought the four link and tapered bags for the rear. As far as labor I get billed for a week at a time and it is not broken down as to what each hour is for. So basically I can't put a specific dollar amount on it. The engine is a 95 and only had a few miles on it when I got it in 96. I don't think it has more than 7 or 8,000 miles on it right now. The wireing harness from the car was used and modified so it was a PITA. To do it again I would just buy a harness made for the swap. __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-10-2003, 03:53 PM	#33
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	Here is some of the recent work on the Jimmy. The floors had to have some massageing due to the new frame. Nothing will hang below the frame rail either. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-10-2003, 03:54 PM	#34
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	2 Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-10-2003, 03:55 PM	#35
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	The bumpers are being narrowed and sectioned. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.