Fun in the rain

[brad_man_72]

when you get your carrier bearing replaced be sure to have your driveshaft ballanced.

[Jacfourteen]

Originally Posted by brad_man_72

when you get your carrier bearing replaced be sure to have your driveshaft ballanced.

Thanks for the tip, I didn't realize you had to re-balance after a carrier swap. I might be ditching the driveline altogether because the reason the carrier went out is the splines on the slipshaft are messed up and it slides really tight, so when the axle moves up/down it put stress on the carrier. I am about to swap out rears from a D60 to a 12 bolt so I will address the driveline then.