Where to get 15x10 original style wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazerboy72 · 01-03-2011, 11:37 PM

I am looking for some 15x10 original style wheels. I just need the plain wheels with that the dog dish caps fit on. I can find rally's but not the regular ones. I checked wheel vintiques but I cant tell by the picture which style I need. Any help would be greatly appreciated.

ChevLoRay · 01-04-2011, 12:01 AM

5 or 6-lug?

Bob 68327 · 01-04-2011, 12:31 AM

stockton wheel should have what you're lookin for

Bob 68327 · 01-04-2011, 12:39 AM

I think this is what u are looking for ... They come in almost any size and bolt pattern from stockton wheel.

blazerboy72 · 01-04-2011, 06:09 AM

Quote:

Originally Posted by ChevLoRay

5 or 6-lug?

5 lug

**special-K** · 01-04-2011, 09:50 AM

To get ones that look like the originals you'll need to find a place that builds custom wheels. The ones offered by Stockton and Wheel Vintiques are similar but not at all the same. That Stockton wheel doesn't even have vent holes.

blazerboy72 · 01-04-2011, 11:13 AM

That is what I thought. I guess I will just try to get mine widened to a 15x10.

Sicklajoie · 01-04-2011, 08:52 PM

Quote:

Originally Posted by special-K

To get ones that look like the originals you'll need to find a place that builds custom wheels. The ones offered by Stockton and Wheel Vintiques are similar but not at all the same. That Stockton wheel doesn't even have vent holes.

That rots. I was hoping the Stockton had a stock appearing look. A wheel without the vent holes just looks unfinished IMO. I've tries twice to get ahold of Wheel vintiques about vent holes on their 8 lug OE but no one's gotten back to me.

**NC67Chev** · 03-12-2011, 08:50 AM

Call the guys at Rally America. They use original factory centers to make the width you need.

ChevLoRay · 03-12-2011, 09:44 AM

Widening wheels has been a part of the hot rod car scene for years. I remember articles in the "Little Books" about it. All it takes is money, unless you can do it yourself.

**Boog** · 03-12-2011, 10:04 AM

I widened a pair of truck rallys once for myself just to see how it'd come out. I didn't have any special tools mind you. Just a torch, stick welder and grinder. I did mount the wheel to an extra spindle I had to spin it and check the runout as I tacked it in place. When done I had the only set of 10" wide truck rallys around. Everybody had to know where I got them. They were used on numerous trucks over the years. I loaned them to a nephew some years back and haven't seen them since. As a matter of fact I haven't seen the nephew in a few years either...

*Shane* · 03-12-2011, 10:45 AM

be careful if you choose to do business with Stockton wheel ... LOTS of complaints out there in the "traditional hot rod" world on these guys

01-03-2011, 11:37 PM	#1
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Where to get 15x10 original style wheels I am looking for some 15x10 original style wheels. I just need the plain wheels with that the dog dish caps fit on. I can find rally's but not the regular ones. I checked wheel vintiques but I cant tell by the picture which style I need. Any help would be greatly appreciated.

01-04-2011, 12:01 AM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Where to get 15x10 original style wheels 5 or 6-lug? __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-04-2011, 12:31 AM	#3
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Where to get 15x10 original style wheels stockton wheel should have what you're lookin for __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker Last edited by Bob 68327; 01-04-2011 at 12:35 AM.

01-04-2011, 12:39 AM	#4
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Where to get 15x10 original style wheels I think this is what u are looking for ... They come in almost any size and bolt pattern from stockton wheel. Attached Images __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker Last edited by Bob 68327; 01-04-2011 at 12:40 AM.

01-04-2011, 09:50 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Where to get 15x10 original style wheels To get ones that look like the originals you'll need to find a place that builds custom wheels. The ones offered by Stockton and Wheel Vintiques are similar but not at all the same. That Stockton wheel doesn't even have vent holes. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-04-2011, 11:13 AM	#7
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: Where to get 15x10 original style wheels That is what I thought. I guess I will just try to get mine widened to a 15x10.

03-12-2011, 08:50 AM	#9
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: Where to get 15x10 original style wheels Call the guys at Rally America. They use original factory centers to make the width you need. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

03-12-2011, 09:44 AM	#10
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Where to get 15x10 original style wheels Widening wheels has been a part of the hot rod car scene for years. I remember articles in the "Little Books" about it. All it takes is money, unless you can do it yourself. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

03-12-2011, 10:04 AM	#11
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: Where to get 15x10 original style wheels I widened a pair of truck rallys once for myself just to see how it'd come out. I didn't have any special tools mind you. Just a torch, stick welder and grinder. I did mount the wheel to an extra spindle I had to spin it and check the runout as I tacked it in place. When done I had the only set of 10" wide truck rallys around. Everybody had to know where I got them. They were used on numerous trucks over the years. I loaned them to a nephew some years back and haven't seen them since. As a matter of fact I haven't seen the nephew in a few years either... __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-12-2011, 10:45 AM	#12
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Where to get 15x10 original style wheels be careful if you choose to do business with Stockton wheel ... LOTS of complaints out there in the "traditional hot rod" world on these guys



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.