How low with CPP bolt in notch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jhuff85 · 03-14-2011, 01:25 PM

How low can you go with a CPP bolt in notch. I currently have 5 inch rear springs and I am wanting to get 2 in blocks but I am not sure if can go that low or not with the bolt in notch

**leddzepp** · 03-14-2011, 02:34 PM

You can. I have 5" drop springs and 1.5" blocks, no c-notch (I have it, but not yet installed) After I put in the notch, I plan to go with 2" blocks.

roofingbloke · 03-14-2011, 05:45 PM

I have 5" springs, i have 3.5" of clearence between top of axle and lower point of chassis, so if i add 2" lowering blocks i will only have 1.5" of travel, not enougth,

Measure twice cut once,

I was going for a c notch but i think i will only add a step notch a year later, so step notch it is for me,

**N2TRUX** · 03-14-2011, 10:40 PM

Welcome to the forum Jhuff85. Can we assume you have an 85? Please tell us what year truck. It would really help if we knew what size tire too.

Mike J · 03-15-2011, 06:48 PM

I have cpp 5" rear springs and 2" cpp rear blocks with cpp c-notch - it has lots of room (of course this is on my '68- don't know what year truck you have)

OG2wdblaze · 03-16-2011, 03:15 AM

Quote:

Originally Posted by Mike J

I have cpp 5" rear springs and 2" cpp rear blocks with cpp c-notch - it has lots of room (of course this is on my '68- don't know what year truck you have)

good to know!

03-14-2011, 01:25 PM	#1
Jhuff85 Registered User Join Date: Sep 2010 Location: Carthage Missouri Posts: 2	How low with CPP bolt in notch? How low can you go with a CPP bolt in notch. I currently have 5 inch rear springs and I am wanting to get 2 in blocks but I am not sure if can go that low or not with the bolt in notch

03-14-2011, 02:34 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: How low with CPP bolt in notch? You can. I have 5" drop springs and 1.5" blocks, no c-notch (I have it, but not yet installed) After I put in the notch, I plan to go with 2" blocks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-14-2011, 05:45 PM	#3
roofingbloke Registered User Join Date: Apr 2009 Location: swindon, england Posts: 290	Re: How low with CPP bolt in notch? I have 5" springs, i have 3.5" of clearence between top of axle and lower point of chassis, so if i add 2" lowering blocks i will only have 1.5" of travel, not enougth, Measure twice cut once, I was going for a c notch but i think i will only add a step notch a year later, so step notch it is for me,

03-14-2011, 10:40 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: How low with CPP bolt in notch? Welcome to the forum Jhuff85. Can we assume you have an 85? Please tell us what year truck. It would really help if we knew what size tire too. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 03-14-2011 at 10:42 PM.

03-15-2011, 06:48 PM	#5
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: How low with CPP bolt in notch? I have cpp 5" rear springs and 2" cpp rear blocks with cpp c-notch - it has lots of room (of course this is on my '68- don't know what year truck you have) __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.