|
03-17-2011, 01:23 AM
|
#1 |
|
Registered User
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,082
|
Restoring Doors
Since all you guys do some crazy restoring stuff, have any of you attempted to restore the inside of your doors? Actually cutting the door to get to all it's guts and sanding in there and putting in all new components? I've been wondering about that for sometime now...Just curious if anyone has attempted that. I wanna see some pics!
|
|
|
|
03-17-2011, 10:27 AM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: Regina Saskatchewan
Posts: 22
|
Re: Restoring Doors
Id be interested in some pics of this as well.
|
|
|
|
|
03-17-2011, 10:47 AM
|
#3 |
|
72 GMC
Join Date: Feb 2008
Location: Wells, Maine
Posts: 534
|
Re: Restoring Doors
someone on this board did it in detail.
its probably in the FAQ if not, i'll see if i saved the like when i get home |
|
|
|
|
03-17-2011, 11:22 AM
|
#4 |
|
Registered User
Join Date: Nov 2009
Location: newbury park california
Posts: 1,038
|
Re: Restoring Doors
I have no pics to back it up but i cleaned and painted the inside of the doors on my avatar truck with rattle can semi gloss black (three years ago) and last week I removed the door panel to lube the window regulator and had forgot about painting inside of the doors. the still looked great! cheers, Pat
|
|
|
|
|
03-17-2011, 12:21 PM
|
#5 |
|
Registered User
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,082
|
Re: Restoring Doors
I'm wondering if anyone took a cutting wheel and cut the door to get to the guts and removed all the rust that way. I'm sure you could get it to be better than the way it came from the factory. Cuz I don't think you could remove all of it thoroughly if you just remove the door panel and used that hole that's already in the door. I wanna try it, but my truck is my daily driver right now. I don't really wanna have my truck look like a jeep lol.
Hope someone has some pics. Thanks! |
|
|
|
|
03-17-2011, 02:50 PM
|
#6 |
|
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: Restoring Doors
I just did mine, but mine had speaker cut outs so getting into the door was easy..
|
|
|
|
|
03-17-2011, 07:04 PM
|
#7 |
|
Registered User
Join Date: Aug 2008
Location: North GA
Posts: 400
|
Re: Restoring Doors
Here are my doors.. I have more pics with some more progress I have made but they are on my phone. Replacing a lot of metal, including lower door bottoms and full door skins. Took them both completely apart so I could get to all the rust
__________________
"Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress" |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
