Anyone with a bell tech 5/7 kit on a square?

[franky69c10]

So 15x8 ralley's will work with 3" drop spindles without grinding the A-arms ?
Posted via Mobile Device

[lolife99]

Originally Posted by franky69c10

So 15x8 ralley's will work with 3" drop spindles without grinding the A-arms ?
Posted via Mobile Device

No.
Not without grinding.
They have more than 3.75" BS. (4")
Grinding is required.
Takes about 5 minutes per side to slighty trim the lower edge of the a-arm.