VA Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-11-2011, 12:57 AM

Fedhill USA Brake line kit. Brake lines are cunifer which makes them easier to bend and flare than std lines. Comes with assorted fittings. New never used

Runs 123 plus shipping from Fedhill but currently out of stock (see link)

http://store.fedhillusa.com/t4.aspx

In stock 1 set from me to you

Asking 120 shipped.

1 coil of 3/16"/4.75mm OD tubing x 25 foot, 1/2 coil of 1/4" OD tubing x 12 foot and a #2 and #4 nut pack
#2 Nut Pack:
10 ea A1-3
4 ea A1L-3
1 ea UA1-3
2 ea A12-3
2 ea A13-3
1 ea A14-3
#4 Nut Pack:
10 ea A2-4
6 ea A2L-4
1 ea UA2-4
1 ea A23-4
1 ea A24-4

VA72C10 · 03-11-2011, 12:59 AM

Info about cunifer for those that aren't familiar (I wasn't until I read about it)

Quote:

Cunifer is a seamless, copper nickel alloy DOT approved brake line used for OEM and replacement brake lines, fuel lines, power steering and cooling lines. Corrosion proof and easy to install high pressure hydraulic tubing for the harshest environments. All of our tubing conforms to hydraulic brake tubing specifications SAE J1650, DIN 74234 and BS 2871.

**FL71C10** · 03-11-2011, 01:23 AM

And I thought cunifers were those trees with the pine cones!

FRENCHBLUE72 · 03-11-2011, 09:53 AM

If I bought one of these kits what else would I need? I have a bender and flare tool already and im needing breaks asap..

VA72C10 · 03-11-2011, 10:12 AM

I am honestly not sure. It comes with two misc bags of fittings (listed out) but it's a universal style kit...not specific for our trucks. But I was going to use it for my project and as I got it bent order any other necessary fittings before I flared it.

VA72C10 · 03-12-2011, 09:55 AM

ttt

VA72C10 · 03-13-2011, 01:52 AM

ttt

VA72C10 · 03-15-2011, 01:13 AM

ttt

VA72C10 · 03-17-2011, 03:30 AM

fuel, brake, or power steering lines......

VA72C10 · 03-21-2011, 11:59 PM

ttt

VA72C10 · 03-27-2011, 11:51 PM

ttt....new parts cheaper than you can buy them and ready to ship!!!

classicchev · 03-28-2011, 12:01 AM

The same shipped to me???

VA72C10 · 03-28-2011, 12:06 AM

Sure, I can do that. You guys shouldn't always get burned on shipping

I've found USPS isn't too bad...Probably 10-15 extra shipping.

pm sent with payment info

VA72C10 · 03-28-2011, 08:31 PM

still available as of now...

03-11-2011, 12:57 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) Fedhill USA Brake line kit. Brake lines are cunifer which makes them easier to bend and flare than std lines. Comes with assorted fittings. New never used Runs 123 plus shipping from Fedhill but currently out of stock (see link) http://store.fedhillusa.com/t4.aspx In stock 1 set from me to you Asking 120 shipped. 1 coil of 3/16"/4.75mm OD tubing x 25 foot, 1/2 coil of 1/4" OD tubing x 12 foot and a #2 and #4 nut pack #2 Nut Pack: 10 ea A1-3 4 ea A1L-3 1 ea UA1-3 2 ea A12-3 2 ea A13-3 1 ea A14-3 #4 Nut Pack: 10 ea A2-4 6 ea A2L-4 1 ea UA2-4 1 ea A23-4 1 ea A24-4 __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-11-2011 at 01:49 AM.

03-11-2011, 01:23 AM	#3
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Cunifer brake line kit (Easy to bend and flare and don't rust) And I thought cunifers were those trees with the pine cones! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-11-2011, 10:12 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) I am honestly not sure. It comes with two misc bags of fittings (listed out) but it's a universal style kit...not specific for our trucks. But I was going to use it for my project and as I got it bent order any other necessary fittings before I flared it. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-12-2011, 09:55 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-13-2011, 01:52 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-11-2011, 09:53 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) If I bought one of these kits what else would I need? I have a bender and flare tool already and im needing breaks asap.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 03-11-2011 at 09:53 AM. Reason: cant spell

03-15-2011, 01:13 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-17-2011, 03:30 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) fuel, brake, or power steering lines...... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-21-2011, 11:59 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-27-2011, 11:51 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) ttt....new parts cheaper than you can buy them and ready to ship!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 12:01 AM	#12
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) The same shipped to me??? __________________ 67- 72 Parts collecter

03-28-2011, 12:06 AM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) Sure, I can do that. You guys shouldn't always get burned on shipping I've found USPS isn't too bad...Probably 10-15 extra shipping. pm sent with payment info __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 08:31 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cunifer brake/fuel line kit (Easy to bend and flare and don't rust) still available as of now... __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.