KS 71 blazer getting parted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-28-2011, 09:22 PM

Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry.
Thanks Randy

teeitup · 03-28-2011, 09:23 PM

71blksuper4x4, Trevor, chrome is yours. Thanks Randy

teeitup · 03-28-2011, 09:25 PM

47thriftmaster, Monte, chrome hubs and blue knob $20, cig housing $5, 3rd in line on rear panel chrome. Door shims $15 are yours. Thanks Randy

teeitup · 03-28-2011, 09:28 PM

1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy

teeitup · 03-28-2011, 09:29 PM

Dirt72, not cutting center section out of this one, the whole dash will be cut out since it doesn't have the speaker slots on top side. Wheel tubs are junk, sorry. Thanks Randy

teeitup · 03-28-2011, 09:30 PM

Everyone, Pics of parts coming in a bit, never had a chance to get shipping quotes tonight, sorry. Thanks Randy

teeitup · 03-28-2011, 09:43 PM

pass side and surface rust down low pass side

1949gmc · 03-29-2011, 12:26 AM

Quote:

Originally Posted by teeitup

1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy

I'll take it all, Randy. Let me know when you've got a total figured up. Thanks, Ray

kilomanjaro · 03-29-2011, 01:44 AM

Randy, I will take those weatherstrip retainers. PM Sent.
Thanks
John

Fesser · 03-28-2011, 10:58 PM

So, 90 for the stuff I am first on? Is that shipped? If so, what is your Paypal address. I could also use a radio knob witht he silver (right hand knob). Let me know total, PM or here, and I'll send it in the morning. Frank

Quote:

Originally Posted by teeitup

Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry.
Thanks Randy

Fesser · 03-28-2011, 11:44 PM

Randy, When you can, let me know the total shipped. All sounds good.

Frank

Quote:

Originally Posted by teeitup

Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry.
Thanks Randy

03-28-2011, 09:22 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2011 at 09:23 PM.

03-28-2011, 09:23 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted 71blksuper4x4, Trevor, chrome is yours. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:25 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted 47thriftmaster, Monte, chrome hubs and blue knob $20, cig housing $5, 3rd in line on rear panel chrome. Door shims $15 are yours. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:28 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted 1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:29 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted Dirt72, not cutting center section out of this one, the whole dash will be cut out since it doesn't have the speaker slots on top side. Wheel tubs are junk, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:30 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted Everyone, Pics of parts coming in a bit, never had a chance to get shipping quotes tonight, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:43 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 blazer getting parted pass side and surface rust down low pass side Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2011 at 09:43 PM.

03-29-2011, 01:44 AM	#9
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: 71 blazer getting parted Randy, I will take those weatherstrip retainers. PM Sent. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.