newbie to the C10 8 LUG? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

InkedinRI · 03-29-2011, 01:24 AM

hello i have been looking at this site for a few days now. i bought a 1968 chevy c10 vin# CS148T1xxxxxx i know its a 1/2 ton 6cyl truck from the vin. what i don't understand is today i removed the wheels it had on it 6 lug Aluminum wheels off a newer chevy truck, to find hidden under the center cap 8 lug axles? someone put spacers on to use 6 lug wheels. it was my understanding only 3/4 ton trucks have 8 lugs? i thought someone mite have put a 8 lug rear end in it, but it has 8 to 6 lug spacers in the front also. can someone fill me in on what the hell i have?

Inked

Mike Bradbury · 03-29-2011, 01:41 AM

Sounds like you have a C20 that some one wanted to convert to a C10 but did not want to spend the dough. Maybe the cab had rusted out and the p.o. found a C10 cab, that is where the vin# is. The other idea is he put 8 lug axles on a C10, but then why would he use spacers to 6 lug.
Just tell your environmental friends you bought a hybrid.

InkedinRI · 03-29-2011, 10:12 AM

Thanks. If they did change the cab of axles it was some time ago because it does not look like it's been touched In years! It's a 3 owner truck. I should call the guy I bought off of and see if he knows any history?
Posted via Mobile Device

SCOTI · 03-29-2011, 10:27 AM

If the VIN indicates it's a 1/2 ton, the front & rear suspensions were swapped @ some time (or the cab was).

**N2TRUX** · 03-29-2011, 10:28 AM

Welcome to the forum InkedinRI. I have no idea why it is like that, but now you need to decide what you want to do with it. Take some pics, and let us know the direction you want to go. If its not like you want, it can be converted using later model parts.

InkedinRI · 03-29-2011, 12:26 PM

thanks guys. well i have a new problem.. i took off my newer chevy 16'' 6 lug wheels. put on my mid 80,s 4x4 rally type wheel i noticed the lug patten favored one side of the wheel i bolted the on once i go over 30 mph it feels like i have cam lobes for wheels! is there a different spacer i need to buy?

InkedinRI · 03-29-2011, 12:28 PM

this is the newer wheel i had on there.

InkedinRI · 03-29-2011, 04:57 PM

Newer wheels are a little different than the old ones by a hair. Plus I pulled off the wheels and they are 6 lug ( my stupidity ) all the lugs on the spacer made me think it was 8 lug. Anyway the big picture is all I needed to do is take off the spacers and bolt on my old style rally's. Thanks for all your help.
Posted via Mobile Device

**lolife99** · 03-29-2011, 06:18 PM

Quote:

Originally Posted by InkedinRI

Newer wheels are a little different than the old ones by a hair. Plus I pulled off the wheels and they are 6 lug ( my stupidity ) all the lugs on the spacer made me think it was 8 lug. Anyway the big picture is all I needed to do is take off the spacers and bolt on my old style rally's. Thanks for all your help.
Posted via Mobile Device

Yes.
Take off the spacers and bolt on your 6-lug ralley wheels.

03-29-2011, 01:24 AM	#1
InkedinRI Registered User Join Date: Mar 2011 Location: West Warwick Rhode Island Posts: 20	newbie to the C10 8 LUG? hello i have been looking at this site for a few days now. i bought a 1968 chevy c10 vin# CS148T1xxxxxx i know its a 1/2 ton 6cyl truck from the vin. what i don't understand is today i removed the wheels it had on it 6 lug Aluminum wheels off a newer chevy truck, to find hidden under the center cap 8 lug axles? someone put spacers on to use 6 lug wheels. it was my understanding only 3/4 ton trucks have 8 lugs? i thought someone mite have put a 8 lug rear end in it, but it has 8 to 6 lug spacers in the front also. can someone fill me in on what the hell i have? Inked

03-29-2011, 01:41 AM	#2
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: newbie to the C10 8 LUG? Sounds like you have a C20 that some one wanted to convert to a C10 but did not want to spend the dough. Maybe the cab had rusted out and the p.o. found a C10 cab, that is where the vin# is. The other idea is he put 8 lug axles on a C10, but then why would he use spacers to 6 lug. Just tell your environmental friends you bought a hybrid. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583 Last edited by Mike Bradbury; 03-29-2011 at 01:44 AM.

03-29-2011, 10:12 AM	#3
InkedinRI Registered User Join Date: Mar 2011 Location: West Warwick Rhode Island Posts: 20	Re: newbie to the C10 8 LUG? Thanks. If they did change the cab of axles it was some time ago because it does not look like it's been touched In years! It's a 3 owner truck. I should call the guy I bought off of and see if he knows any history? Posted via Mobile Device __________________ 1968 Chevy C10 305 3 speed 12 bolt

03-29-2011, 10:27 AM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: newbie to the C10 8 LUG? If the VIN indicates it's a 1/2 ton, the front & rear suspensions were swapped @ some time (or the cab was). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-29-2011, 10:28 AM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: newbie to the C10 8 LUG? Welcome to the forum InkedinRI. I have no idea why it is like that, but now you need to decide what you want to do with it. Take some pics, and let us know the direction you want to go. If its not like you want, it can be converted using later model parts. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-29-2011, 12:26 PM	#6
InkedinRI Registered User Join Date: Mar 2011 Location: West Warwick Rhode Island Posts: 20	Re: newbie to the C10 8 LUG? thanks guys. well i have a new problem.. i took off my newer chevy 16'' 6 lug wheels. put on my mid 80,s 4x4 rally type wheel i noticed the lug patten favored one side of the wheel i bolted the on once i go over 30 mph it feels like i have cam lobes for wheels! is there a different spacer i need to buy? __________________ 1968 Chevy C10 305 3 speed 12 bolt

03-29-2011, 12:28 PM	#7
InkedinRI Registered User Join Date: Mar 2011 Location: West Warwick Rhode Island Posts: 20	Re: newbie to the C10 8 LUG? this is the newer wheel i had on there. Attached Images __________________ 1968 Chevy C10 305 3 speed 12 bolt

03-29-2011, 04:57 PM	#8
InkedinRI Registered User Join Date: Mar 2011 Location: West Warwick Rhode Island Posts: 20	Re: newbie to the C10 8 LUG? Newer wheels are a little different than the old ones by a hair. Plus I pulled off the wheels and they are 6 lug ( my stupidity ) all the lugs on the spacer made me think it was 8 lug. Anyway the big picture is all I needed to do is take off the spacers and bolt on my old style rally's. Thanks for all your help. Posted via Mobile Device __________________ 1968 Chevy C10 305 3 speed 12 bolt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.