TX WTB-Power steering pump and bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clos69 · 03-29-2011, 09:17 AM

Hey ya'll...i need a power steering pump and bracket for my 454. I need one for a long water pump. I have a 68-72 BBc swp ps pump with remote reservoir that i am willing to trade for 73+. Please let me know how much shipped to Tx, 76182. Thanks Carlos

**too much stuff** · 03-29-2011, 10:28 AM

I have a complete 454 with A/c i was thinking of converting over to swp. Would you be interested in the whole front of the engine? (all brackets, pullies etc.) I don't want to break up the set.
Eric

clos69 · 03-29-2011, 10:51 AM

Thx for the offer but i only need the ps stuff...i have everything else.
Posted via Mobile Device

clos69 · 03-29-2011, 02:33 PM

Ok I've been looking at some bbc pix and it looks like the ps belt runs off the crank pulley...is this correct? Maybe I can still use the one I have?

*67/72junkie* · 03-29-2011, 02:54 PM

I have correct pwr steering pump with mount and pulley from 1973 454 that I will trade even up for pwr steering swp setup

clos69 · 03-29-2011, 03:16 PM

Cool u have any pics?? Ill post mine when i get home.thx
Posted via Mobile Device

*67/72junkie* · 03-29-2011, 04:34 PM

Name: 101_0121.jpg
Views: 496
Size: 27.9 KB

Name: 101_0122.jpg
Views: 599
Size: 102.1 KB

Name: 101_0123.jpg
Views: 507
Size: 103.7 KB

Name: 101_0125.jpg
Views: 1310
Size: 24.9 KB

Name: 101_0124.jpg
Views: 1557
Size: 109.2 KB

I have 2,1 is off 70s 454 has 3 grove pulley 1 pressure line and 1 return remote res. lwp 2nd is off mid 80s 454 has 2 grove pulley 2 pressure lines and 1 return remote res lwp.It is for hydroboost setup for brakes.both have the same lwp mount setup.2 brackets one mounts pump to block and one is slotted adjusting bracket.I just showed the 2nd in case you might have plans for hydro boost.

ratrod67 · 03-29-2011, 05:55 PM

You can buy the long water pump brackets at the dealership. I bought a few sets from Bruce Lowrie. These are the numbers I used.

3967422--bracket
14015391--bracket
3967424--spacer

clos69 · 03-30-2011, 10:13 PM

Pics for junkie.....can you tell me if I have the lwp ps stuff?It looks like the one you have w/3 grooves....if this is the case then I only need the bottom bracket correct??

*67/72junkie* · 03-30-2011, 10:35 PM

you just need the mounting bracket.I don't want to separate mine but I have a friend with lots of 454 stuff and he probably has 1.I will check for you.

clos69 · 03-30-2011, 10:40 PM

Quote:

Originally Posted by 67/72junkie

you just need the mounting bracket.I don't want to separate mine but I have a friend with lots of 454 stuff and he probably has 1.I will check for you.

Ok thanks...just let me know how much shipped to TX,76182

03-29-2011, 09:17 AM	#1
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	WTB-Power steering pump and bracket Hey ya'll...i need a power steering pump and bracket for my 454. I need one for a long water pump. I have a 68-72 BBc swp ps pump with remote reservoir that i am willing to trade for 73+. Please let me know how much shipped to Tx, 76182. Thanks Carlos __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-29-2011, 10:28 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: WTB-Power steering pump and bracket I have a complete 454 with A/c i was thinking of converting over to swp. Would you be interested in the whole front of the engine? (all brackets, pullies etc.) I don't want to break up the set. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-29-2011, 10:51 AM	#3
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB-Power steering pump and bracket Thx for the offer but i only need the ps stuff...i have everything else. Posted via Mobile Device __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-29-2011, 02:33 PM	#4
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB-Power steering pump and bracket Ok I've been looking at some bbc pix and it looks like the ps belt runs off the crank pulley...is this correct? Maybe I can still use the one I have? __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-29-2011, 02:54 PM	#5
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: WTB-Power steering pump and bracket I have correct pwr steering pump with mount and pulley from 1973 454 that I will trade even up for pwr steering swp setup

03-29-2011, 03:16 PM	#6
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB-Power steering pump and bracket Cool u have any pics?? Ill post mine when i get home.thx Posted via Mobile Device __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-29-2011, 04:34 PM	#7
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: WTB-Power steering pump and bracket I have 2,1 is off 70s 454 has 3 grove pulley 1 pressure line and 1 return remote res. lwp 2nd is off mid 80s 454 has 2 grove pulley 2 pressure lines and 1 return remote res lwp.It is for hydroboost setup for brakes.both have the same lwp mount setup.2 brackets one mounts pump to block and one is slotted adjusting bracket.I just showed the 2nd in case you might have plans for hydro boost.

03-29-2011, 05:55 PM	#8
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Re: WTB-Power steering pump and bracket You can buy the long water pump brackets at the dealership. I bought a few sets from Bruce Lowrie. These are the numbers I used. 3967422--bracket 14015391--bracket 3967424--spacer

03-30-2011, 10:13 PM	#9
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB-Power steering pump and bracket Pics for junkie.....can you tell me if I have the lwp ps stuff?It looks like the one you have w/3 grooves....if this is the case then I only need the bottom bracket correct?? Attached Images __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-30-2011, 10:35 PM	#10
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: WTB-Power steering pump and bracket you just need the mounting bracket.I don't want to separate mine but I have a friend with lots of 454 stuff and he probably has 1.I will check for you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.