Help me.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 07-15-2003, 10:01 PM

Can someone help me out with my throttle set-up... Went from s.b. to b.b. and with the b.b. in the rear hole the cable appear's to be to short .here is a pic of the 2 cable's I have ... Do I need a b.b. specific cable??

**FRENCHBLUE72** · 07-15-2003, 10:02 PM

2nd pic 2wd 72 chevy

Johns70 · 07-15-2003, 11:22 PM

i can't remember for sure but i think all the two wheel drives were the same and they had a longer one for the 4x4. what thottle cable bracket are you useing on the carb?
mine is hooked up useing the factory peices except i removed the pin and drill a hole to move the cable out a little to keep it lined up with the carb.

**FRENCHBLUE72** · 07-16-2003, 12:14 AM

Thank's phillip just stopped buy and showed me the problem. I need a 4wd one because I set the motor back so far. Thank's for the reply.

*Phillip Johnson* · 07-16-2003, 12:46 AM

Yup... The 4wd is a shorter cable and Im looking in my magic box of spare parts for one in the morning...

07-15-2003, 10:01 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Help me.... Can someone help me out with my throttle set-up... Went from s.b. to b.b. and with the b.b. in the rear hole the cable appear's to be to short .here is a pic of the 2 cable's I have ... Do I need a b.b. specific cable?? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2003, 10:02 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	2nd pic 2wd 72 chevy Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2003, 11:22 PM	#3
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	i can't remember for sure but i think all the two wheel drives were the same and they had a longer one for the 4x4. what thottle cable bracket are you useing on the carb? mine is hooked up useing the factory peices except i removed the pin and drill a hole to move the cable out a little to keep it lined up with the carb. __________________ 69 chevy short wide box project 70 GMC jimmy project

07-16-2003, 12:14 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Thank's phillip just stopped buy and showed me the problem. I need a 4wd one because I set the motor back so far. Thank's for the reply. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-16-2003, 12:46 AM	#5
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,580	Yup... The 4wd is a shorter cable and Im looking in my magic box of spare parts for one in the morning...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.