Free parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged78 · 04-25-2003, 07:19 PM

Are the mirrors going with the doors?

Bobs76 · 04-25-2003, 10:34 PM

Sorry it's taken so long to reply but I have been out getting my enginne ready to pull in the morning, puttimg a new crank in it. I will see what shape the 79 is in either tomorrow or sunday depending on the progress of the crank swap in my truck.

TX_Mudder The truck I have now still has the seat belts, they are tan and I think they are still good. I will check in the morning.

chevy68388 the drivers tank is spoken for but the passenger tank is not. I can check on shipping if you still want it.

chevy68388 · 04-27-2003, 02:18 AM

aww i realy need a driver side mine has sugar in it someone must of thought i wasnt sweet

Bobs76 · 04-27-2003, 08:21 AM

I will check the 79 that I am going to look at. If it has a drivers side one I will let you know. Is 79 when they changed sides from right to left? Well I will check it.

Blue68 · 04-30-2003, 05:52 PM

What do you know about the rear axle?

The price sounds about right. What's the year? '76? If the front clip is in decent shape, you might post it to the 67-72 board for someone who might be interested in swap to disc.

Bobs76 · 07-13-2003, 10:28 AM

OK this is the last chance for any parts before I take this thing to the scrap yard (not wrecking yard) I am going to take it across the scales so it can be recycled into a half dozen rice burners...
The doors are already gone, the back glass is gone and the steering column is gone. it has lots of the small trim pieces for the cab. the drive shaft is still there. Everything is free...you can pick it up or pay for the shipping.... don't let any of this stuff go to waste.....

gldevall · 07-13-2003, 04:02 PM

Was it a shortbed? If so, do you have the e-brake cable? What type of rear end?

littlebubba · 07-14-2003, 01:12 AM

Check with GREYHOUND EXPRESS Shipping, they should be about to ship these doors. They are the shipping part of the BUS COMPANY and thier rates are pretty reasonable for this type of stuff considering the size and wieght. If there's a terminal close by you. They have a 1-800 number if you need more info or advice. Just a thought to help you out.

Bobs76 · 07-14-2003, 07:37 PM

Yes it is a SWB truck, I have not looked at the e-brake cable yet. I will check it and see how good it is.

dswancutt · 07-14-2003, 10:10 PM

Are the dust seals that go between the cab and fender still available (see the 2nd and 3rd picture) and are they any good. I am interested in both the RH & LH side. What would the shipping cost be to Fremont, NE 68025-8304

Thanks;

Doug

littlebubba · 07-15-2003, 12:59 AM

I could use the front lower control arms and hardware, if they are good ones. Not damaged from the wreck.

gldevall · 07-15-2003, 08:28 AM

What about those mirrors? They still available? What kind of shape are they in?

1974ChevyC10 · 07-16-2003, 12:54 AM

damn i would take it off your hands if i wasnt in arizona....anyone for a road trip to texas lol

nrgflow · 07-16-2003, 07:06 PM

How is the interior carpeting? If good, I will pay for shipping to 98144.

Thanks!

04-25-2003, 07:19 PM	#26
bagged78 world class smart ass! Join Date: Jan 2003 Location: Clinton Utah Posts: 335	Are the mirrors going with the doors? __________________ Aric 75 2WD BLAZER (never ending project) -some day maybe- 02 2500HD CREW CAB 4X (daily drive) -8" lift 37s and 22s- ____ ____________________________

04-25-2003, 10:34 PM	#27
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Sorry it's taken so long to reply but I have been out getting my enginne ready to pull in the morning, puttimg a new crank in it. I will see what shape the 79 is in either tomorrow or sunday depending on the progress of the crank swap in my truck. TX_Mudder The truck I have now still has the seat belts, they are tan and I think they are still good. I will check in the morning. chevy68388 the drivers tank is spoken for but the passenger tank is not. I can check on shipping if you still want it. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-27-2003, 02:18 AM	#28
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	aww i realy need a driver side mine has sugar in it someone must of thought i wasnt sweet __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

04-27-2003, 08:21 AM	#29
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I will check the 79 that I am going to look at. If it has a drivers side one I will let you know. Is 79 when they changed sides from right to left? Well I will check it. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-30-2003, 05:52 PM	#30
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	What do you know about the rear axle? The price sounds about right. What's the year? '76? If the front clip is in decent shape, you might post it to the 67-72 board for someone who might be interested in swap to disc. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Last edited by Blue68; 04-30-2003 at 05:55 PM.

07-13-2003, 10:28 AM	#31
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	LAST CHANCE OK this is the last chance for any parts before I take this thing to the scrap yard (not wrecking yard) I am going to take it across the scales so it can be recycled into a half dozen rice burners... The doors are already gone, the back glass is gone and the steering column is gone. it has lots of the small trim pieces for the cab. the drive shaft is still there. Everything is free...you can pick it up or pay for the shipping.... don't let any of this stuff go to waste..... __________________ If it aint got t*ts or wheels I am not interested!!!!!!

07-13-2003, 04:02 PM	#32
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Was it a shortbed? If so, do you have the e-brake cable? What type of rear end? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

07-14-2003, 01:12 AM	#33
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Shipping Doors Check with GREYHOUND EXPRESS Shipping, they should be about to ship these doors. They are the shipping part of the BUS COMPANY and thier rates are pretty reasonable for this type of stuff considering the size and wieght. If there's a terminal close by you. They have a 1-800 number if you need more info or advice. Just a thought to help you out.

07-14-2003, 07:37 PM	#34
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Yes it is a SWB truck, I have not looked at the e-brake cable yet. I will check it and see how good it is. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

07-14-2003, 10:10 PM	#35
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Free parts Are the dust seals that go between the cab and fender still available (see the 2nd and 3rd picture) and are they any good. I am interested in both the RH & LH side. What would the shipping cost be to Fremont, NE 68025-8304 Thanks; Doug

07-15-2003, 12:59 AM	#36
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Lower Control arms I could use the front lower control arms and hardware, if they are good ones. Not damaged from the wreck.

07-15-2003, 08:28 AM	#37
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	What about those mirrors? They still available? What kind of shape are they in? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

07-16-2003, 12:54 AM	#38
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	damn i would take it off your hands if i wasnt in arizona....anyone for a road trip to texas lol __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

07-16-2003, 07:06 PM	#39
nrgflow Registered User Join Date: Jun 2003 Location: Seatle Posts: 21	How is the interior carpeting? If good, I will pay for shipping to 98144. Thanks! __________________ Will 82 Chevy Truck LB 292 inline 6 4 spd granny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.