Dual Pattern Corvette Rally Questions ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

missinfishin10 · 04-11-2011, 10:29 AM

Hey all, This set of wheels is for sale for 125.00 about 60 miles from me. The seller says there 5 lug, dual pattern rims. Hes not sure of the pattern combination. He says they fit his S-10 but the back-spacing makes them stick out past the fenders. He also says he's gotten 20+ calls this morning already. Lucky buyer is the first one at his house at 7 p.m. when he gets home from work.
Says there 15" x 8"
What do you guys think the combination is?
What would the backspacing issue be on a C10

Thanks! Jeff

**70cst** · 04-11-2011, 11:20 AM

ttt

ChevyLvr4Life · 04-11-2011, 11:40 AM

Most of the aftermarket rallys that have dual bolt patterns are 5 x 4 1/2" (ford car ) and 5 x 4 3/4" ( Chevy car ). S-10's have the 4 3/4" pattern. Our trucks that are 5 lug are 5 x 5". It's kinda doubtful that they will fit, but you won't really know unless you measure them. The back spacing on these wheels usually runs around 4". Shouldn't really be a problem on your truck. Those are some nice wheels and a good price too. Hope this helps and good luck.

04-11-2011, 10:29 AM	#1
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Dual Pattern Corvette Rally Questions ? Hey all, This set of wheels is for sale for 125.00 about 60 miles from me. The seller says there 5 lug, dual pattern rims. Hes not sure of the pattern combination. He says they fit his S-10 but the back-spacing makes them stick out past the fenders. He also says he's gotten 20+ calls this morning already. Lucky buyer is the first one at his house at 7 p.m. when he gets home from work. Says there 15" x 8" What do you guys think the combination is? What would the backspacing issue be on a C10 Thanks! Jeff Attached Images __________________ 71 LWB Fleetside 1950 3100 Original Project! Last edited by missinfishin10; 04-11-2011 at 10:31 AM.

04-11-2011, 11:20 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Dual Pattern Corvette Rally Questions ? ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-11-2011, 11:40 AM	#3
ChevyLvr4Life Registered User Join Date: Aug 2010 Location: Martinsville, VA Posts: 150	Re: Dual Pattern Corvette Rally Questions ? Most of the aftermarket rallys that have dual bolt patterns are 5 x 4 1/2" (ford car ) and 5 x 4 3/4" ( Chevy car ). S-10's have the 4 3/4" pattern. Our trucks that are 5 lug are 5 x 5". It's kinda doubtful that they will fit, but you won't really know unless you measure them. The back spacing on these wheels usually runs around 4". Shouldn't really be a problem on your truck. Those are some nice wheels and a good price too. Hope this helps and good luck. __________________ 1970 Chevy C10 LWB 307 3OTT 3.73 gear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.