Auxiliary battery trays... any intrest? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**StingRay** · 07-16-2003, 12:59 AM

I can have auxiliary battery trays ( the drivers side one) reproduced to very high standards if sufficient intrest exists. I spent a large amount of time measuring, drawing ( in AutoCad) and running mock ups on cnc eqipment until all of the dimensions were identical to factory pieces. The side plates will accept a stock tray as an original does and they could be offered as unassembled/no tray, mostly assembled but less bottom tray or as completed assemblies with tray and even as powdercoated assemblies. If serious intrest exists I will consider having a small run (at least 10) reproduced as long as I can cover costs. I have no Idea what the final cost would be at this time as I have only done them in aluminum at this point for myself. For factory type steel units I would have to pay for 3rd party programming and production. I won't even think about doing it without some kind of quantity to go out for quote with. Post below if seriously interested.

Ray

palallin · 07-16-2003, 10:47 AM

I'm very interested, though I can't say "at any cost."

07-16-2003, 12:40 PM

same here

**StingRay** · 07-18-2003, 12:24 AM

That's two and I believe I have a third. Any body else?

RED72blazer · 07-18-2003, 01:18 AM

Me... me! I want one

Edmond · 07-18-2003, 07:08 AM

Yep. I'm interested
Not at any cost though.....

Cya,
Edmond

07-16-2003, 12:59 AM	#1
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Auxiliary battery trays... any intrest? I can have auxiliary battery trays ( the drivers side one) reproduced to very high standards if sufficient intrest exists. I spent a large amount of time measuring, drawing ( in AutoCad) and running mock ups on cnc eqipment until all of the dimensions were identical to factory pieces. The side plates will accept a stock tray as an original does and they could be offered as unassembled/no tray, mostly assembled but less bottom tray or as completed assemblies with tray and even as powdercoated assemblies. If serious intrest exists I will consider having a small run (at least 10) reproduced as long as I can cover costs. I have no Idea what the final cost would be at this time as I have only done them in aluminum at this point for myself. For factory type steel units I would have to pay for 3rd party programming and production. I won't even think about doing it without some kind of quantity to go out for quote with. Post below if seriously interested. Ray __________________ Saskatoon, Saskatchewan Canada

07-16-2003, 10:47 AM	#2
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,239	I'm very interested, though I can't say "at any cost." __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. Last edited by palallin; 07-16-2003 at 12:51 PM.

07-18-2003, 12:24 AM	#4
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	That's two and I believe I have a third. Any body else? __________________ Saskatoon, Saskatchewan Canada

07-18-2003, 01:18 AM	#5
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Me... me! I want one __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

07-18-2003, 07:08 AM	#6
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,062	Yep. I'm interested Not at any cost though..... Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- Capelle a/d IJssel, The Netherlands



Register or Log In To remove these advertisements.

07-16-2003, 12:40 PM	#3
Linus0014 Guest Posts: n/a	same here

Register or Log In To remove these advertisements.