![]() |
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
#27 |
|
Registered User
Join Date: Nov 2010
Location: Burrton, KS
Posts: 215
|
Re: Project Larry - 1964 Chevy
Just something to look at for the oil leak...check and make sure there is a short bolt in the front of the block on the passenger side right where the fuel pump pushrod goes through the block. There is two bolt holes right above each other right above the oil pan on the passenger side, it will be the top one. That bolt hole goes all the way through and if there is no bolt plugging it, it will pour oil out (I speak from experience
). Hopefully I explained it well enough ![]() Oh, and if there isn't a bolt in it, make sure to put a very short (1/2" or less) bolt in it or it will hit the fuel pump pushrod and cause more problems
__________________
Pro Touring 1964 C10-Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=441627Project '65 Short Step Daily Driver http://67-72chevytrucks.com/vboard/s...d.php?t=661948 |
|
|
|
| Bookmarks |
|
|