04-15-2011, 02:43 PM | #1 |
been here longer than Liz
Join Date: Feb 2000
Location: Broken Arrow, OK
Posts: 2,437
|
strobe/parade lights
When I get the '87 back in order I'll be using it for most of the PGR funerals/escorts I do. I've seen some vehicles that have the head & tail lights that can strobe, which I'd love to have available when bringing up the rear of our bikes. Anyone know how the conversions works, or what's involved?
__________________
~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin |
04-15-2011, 02:51 PM | #2 |
GoatLube Experss
Join Date: Oct 2009
Location: clarksville, Tn.
Posts: 1,337
|
Re: strobe/parade lights
wrecker supply shop's carry the kit's, I was gonna install one on a roll back I had but it was pretty exspenive back then (10yrs ago). I'm sure they've come down in price by now.
__________________
Goat Lube Express, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's) |
04-15-2011, 02:55 PM | #3 |
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: strobe/parade lights
From seeing all the police cars that we've fixed, the strobe is just another bulb that is added to the light housing. They take the lamp and drill a hole in it so the strobe can stick in it, then they glue or silicone it in place or use little screws if the strobe socket has a shoulder on it, and wire it up.
I use to have a "Wig Wag" box around here, made your headlamps alternate side to side. I'll dig around and see if I can find it for you. I tried to give it away to some of the local cops a few years ago, but they all turned their noses up at it. But back to adding strobes to a square. It would be pretty easy to do in the front park lamps on a stock 87, or even one that has an updated 89-91 suburban front end. The tail lamps would be just as easy to add, put it over on the side next to the park light socket or something. You can almost make out the strobe in the photo here, I circled it. The strobe stuck in from the bottom.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. Last edited by RandyP; 04-15-2011 at 02:59 PM. |
04-15-2011, 03:18 PM | #4 |
Arrived on a Pale Horse
Join Date: Mar 2007
Location: SnagTown Indiana
Posts: 2,524
|
Re: strobe/parade lights
Randy is correct, you will have to drill your light housings and install bushings, etc. They are called hide away strobe systems. I want one too. Posted a link to some decent priced systems below. Whelen probably makes the best but the systems are 3 times the price of these.
LINKY
__________________
Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW Last edited by babyJay; 04-15-2011 at 03:23 PM. |
04-15-2011, 03:38 PM | #5 |
been here longer than Liz
Join Date: Feb 2000
Location: Broken Arrow, OK
Posts: 2,437
|
Re: strobe/parade lights
Thanks guys, good to know it's relatively painless. Randy I'll take you up on the Wig Wag box if you come across it. Thanks for the link Jason, those aren't too bad.
For the front I wouldn't mind adding another housing like the turn signal uses behind the grill. In the back I'd definitely want to put it in the taillight.
__________________
~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin |
04-15-2011, 05:34 PM | #6 |
Getcha Pull
Join Date: Nov 2010
Location: MD
Posts: 691
|
Re: strobe/parade lights
I installed a set of these when I was about 12 on my go kart. Piece of cake. Just drill the hole in the head light with a sharp bit, and install.
__________________
'81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra |
04-16-2011, 01:43 AM | #7 |
Registered User
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
|
Re: strobe/parade lights
The Whelen/emergency services type use a 1" hole. Use a hole saw and go slow. I put a set on my S10 when I was on the local EMT service. Worked great and was very visible, but dont get caught playing with them. IMO spend the extra money and get a whelen setup, it will last forever and you might be able to find a local shop that has decomissioned some cop cars that will sell you a setup cheaper.
For what your wanting to do stay with a lower power unit to also save some cash. This 60w 4 head kit should do you fine for what your looking to do: http://www.galls.com/style.html?asso...t=&style=GR184
__________________
Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/ Last edited by bluex; 04-16-2011 at 01:43 AM. |
Bookmarks |
|
|