guys I need your oppinions

[Cbrown67]

I Posted this in the electrical section but it didnt get many hits so here it is again. if you guys were buying a wiring harness would you get a mini fuse harness or a regular fuse harness?

[bucketObolts]

If by regular, you mean regular sized spade fuses and not glasstubes, then I prefer the regular spades over minis. They're just easier to grab if you got a problem on the side of the road and you dont have pliers, but the mini block would take up less space. Not like you have much more going on under your dash than the fuse block though. I say regular. Thats what I bought at least

[tooter]

[Cbrown67]

Bucket did you get a whole new harness or just the fuse block
Posted via Mobile Device

[bucketObolts]

I bit the bullet and went with the Painless kit. Which is still in the box collecting dust

[71gmcburb]

I just rewired my 66 econoline last summer and I used the large blade fuses for the block and a maxi fuse for the main supply and ignition. I have large fingers and always have a pair of plyers in the glovebox along with the spares also the large fuses are easer to find in an gas station

[Cbrown67]

thanks guys!