LA WTB: SWB Lower Trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 04-02-2011, 06:20 PM

Prefer black, all four pieces. Can also use the two rear pieces in woodgrain. Useable, but not perfect condition.

Please let me know what you have.

Thanks -Chris
Posted via Mobile Device

gringoloco · 04-04-2011, 02:06 AM

Still looking. Could use a LWB passenger rear piece, too...

gringoloco · 04-05-2011, 02:56 PM

Lower molding? Anyone?

Posted via Mobile Device

BB72CHEVKT · 04-05-2011, 03:26 PM

Remember to make sure it is not repop. I just bought an almost complete set of upper and lower in black from a board member and never asked. Sure enough it came in and it was repop, no wonder it looked so good in the pics.

kellytheaker · 04-05-2011, 04:28 PM

just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

BB72CHEVKT · 04-05-2011, 04:41 PM

Quote:

Originally Posted by kellytheaker

just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

it looks good just not what I expected

gringoloco · 04-05-2011, 09:36 PM

Actually doesn't much matter to me. I'd prefer original, but could work with reproduced. Thanks for the info.

Wanna sell yours?

gringoloco · 04-09-2011, 12:19 AM

bumpedy-bump

gringoloco · 04-10-2011, 11:36 PM

Still looking for a passenger rear piece. 69-72. Long or short, black or woodgrain.

Thanks -Chris

VA72C10 · 04-11-2011, 09:35 AM

I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding?

gringoloco · 04-11-2011, 02:28 PM

Quote:

Originally Posted by VA72C10

I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding?

Looking for a black, SWB, passenger rear piece with some wear, but no huge dents or holes. I can work with woodgrain or LWB as well. Or, for that matter, any workable SWB black pieces.

Thanks -Chris

gringoloco · 04-13-2011, 06:05 PM

Still looking...

VA72C10 · 04-13-2011, 09:52 PM

Here's the best piece I have. LWB passenger rear (I believe

)

If interested figure $15 shipped to basically cover shipping

VA72C10 · 04-13-2011, 09:53 PM

The hole on the end is extra of course but I figure that end would be the end you cut to make it work on swb...

gringoloco · 04-13-2011, 11:24 PM

I'll take it! Better than what I have, which is nothing... PM sent.

lynnfield · 04-17-2011, 06:11 PM

If you are still looking, I have a set posted here. I am willing to sell the box moldings seperate. Greg

http://67-72chevytrucks.com/vboard/s...d.php?t=459614

**67sss** · 04-17-2011, 06:43 PM

this came of off a 72 highlander longbed if still need any..

04-02-2011, 06:20 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	WTB: SWB Lower Trim Prefer black, all four pieces. Can also use the two rear pieces in woodgrain. Useable, but not perfect condition. Please let me know what you have. Thanks -Chris Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-04-2011, 02:06 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking. Could use a LWB passenger rear piece, too... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-05-2011, 02:56 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Lower molding? Anyone? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-05-2011, 03:26 PM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: WTB: SWB Lower Trim Remember to make sure it is not repop. I just bought an almost complete set of upper and lower in black from a board member and never asked. Sure enough it came in and it was repop, no wonder it looked so good in the pics. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-05-2011, 04:28 PM	#5
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: WTB: SWB Lower Trim just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

04-05-2011, 09:36 PM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Actually doesn't much matter to me. I'd prefer original, but could work with reproduced. Thanks for the info. Wanna sell yours? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-05-2011 at 09:37 PM.

04-09-2011, 12:19 AM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim bumpedy-bump __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-10-2011, 11:36 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking for a passenger rear piece. 69-72. Long or short, black or woodgrain. Thanks -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-11-2011, 09:35 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding? __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 06:05 PM	#12
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-13-2011, 09:52 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim Here's the best piece I have. LWB passenger rear (I believe ) If interested figure $15 shipped to basically cover shipping __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 09:53 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim The hole on the end is extra of course but I figure that end would be the end you cut to make it work on swb... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 11:24 PM	#15
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim I'll take it! Better than what I have, which is nothing... PM sent. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-17-2011, 06:11 PM	#16
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: WTB: SWB Lower Trim If you are still looking, I have a set posted here. I am willing to sell the box moldings seperate. Greg http://67-72chevytrucks.com/vboard/s...d.php?t=459614 Last edited by lynnfield; 04-17-2011 at 06:12 PM.

04-17-2011, 06:43 PM	#17
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB: SWB Lower Trim this came of off a 72 highlander longbed if still need any.. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.