vacuum guage pic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sakohntr · 07-18-2003, 09:42 PM

testing 123

sakohntr · 07-18-2003, 09:50 PM

Here is a pic of the whole cluster. I originally pulled this dealer installed guage out of a c10 suburban. It still had the installation instructions in the glovebox. Thanks Tim Christian for the new bezel. It is far better than the cheapo ones that are also available.

**68 Stepside** · 07-18-2003, 10:53 PM

That is awesome!!!!

BLAZERMAN · 07-18-2003, 11:36 PM

COOL!! I've never seen one before.

krue · 07-19-2003, 01:11 AM

Pretty cool, I've never seen any thing like that!

**Tim Christian** · 07-20-2003, 12:03 AM

Hey Bruce, That looks good I have never seen one like that either. Your other parts are going out Monday morning. Now the vaccum plate I am sending you is for the small hole beside the oil pressure. Thanks Tim

fast71 · 07-20-2003, 12:14 AM

Cool , I have one just like that in my tool box ,Hum!!

07-18-2003, 09:42 PM	#1
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	vacuum guage pic testing 123 Attached Images __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

07-18-2003, 09:50 PM	#2
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	the rest of the story Here is a pic of the whole cluster. I originally pulled this dealer installed guage out of a c10 suburban. It still had the installation instructions in the glovebox. Thanks Tim Christian for the new bezel. It is far better than the cheapo ones that are also available. Attached Images __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison. Last edited by sakohntr; 07-18-2003 at 09:52 PM.

07-18-2003, 10:53 PM	#3
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	That is awesome!!!! __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-18-2003, 11:36 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	COOL!! I've never seen one before. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

07-19-2003, 01:11 AM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Pretty cool, I've never seen any thing like that! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-20-2003, 12:03 AM	#6
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey Bruce, That looks good I have never seen one like that either. Your other parts are going out Monday morning. Now the vaccum plate I am sending you is for the small hole beside the oil pressure. Thanks Tim

07-20-2003, 12:14 AM	#7
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	Cool , I have one just like that in my tool box ,Hum!! __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.