|
|
|
04-24-2011, 10:59 AM
|
#1 |
|
Registered User
Join Date: Sep 2010
Location: ND
Posts: 520
|
Re: freeze plug issues
Brass or steel, I have used both with good luck. Make sure the hole is cleaned up with some emmery cloth or sand paper as well as a light scuff on the plug. Use the green loctite on the plug and drive it in with a socket that fits just inside the "lip". Let it cure and it should hold. Personally I have never had a problem doing it this way.
__________________
Name: Les ---------------------- Couple 80s Couple 70s One 68 
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
