Brakes - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 04-21-2011, 10:00 AM

Quote:

Originally Posted by Willys47

Is a distrabution valve ok to use when doing a disc front and rear convertion?

no you must use the proper combination valve for the disc/drum system as there is a big difference between the dirstribution valve for the drum/drum system and the combination valve(in it is a proportion valve)that is for the disc/drum system

Longhorn Man · 04-21-2011, 08:44 PM

cdowns... I think that question was askinf about a disk/disk conversion.
If that is the case, you can try it, however, I would plan on getting a manually adjusted proportioning valve so you can fine tune when the rears will lock up.

Willys47 · 04-24-2011, 06:19 PM

thanks for the info.That's what I will do then , install a manually adjusted proportioning valve for the rear.

04-21-2011, 08:44 PM	#27
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Brakes cdowns... I think that question was askinf about a disk/disk conversion. If that is the case, you can try it, however, I would plan on getting a manually adjusted proportioning valve so you can fine tune when the rears will lock up.

04-24-2011, 06:19 PM	#28
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: Brakes thanks for the info.That's what I will do then , install a manually adjusted proportioning valve for the rear. __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.