Parting 1986 K5 Blazer

[crossy]

I have a complete, STOCK 1986 Silverado K5 that I am parting out, the 305 went lame , anything that does not disable it from moving will be sold over the next two weeks. after that I am going to scrap the body and sell anything at all. it had the gray interior.
so far,
dash pad, front seats, ar SOLD! thanx Dan
Rear light harness wiring - SOLD! thanx Paul
Wet Wiper set up. SOLD ! thanx Erik
spare tire carrier SOLD, thanx Jeff
Seat belts SOLD , thanx Steve.
Electric rear window conversion, SOLD, thanx Jim
. I will update this as needed.

READ THIS!!!!!!!!!!!! if you need something you can reply here on the fourms but I do not post prices here. I will however tell if it is available and will honestly describe the condition.
If you WANT something Email me personally at and BE VERY SPECIFIC about what you need and are referring to. not just "bumper" in the subject box . Emails that are not clear & specific get deleted.
I can do things a little different than most that are parting something out. I can cut off pieces of sheet metal that you need, take pics of installed part. measure for holes whatever. I will sell a complete A/C system with all wires marked clearly, bolts ,screws , pictures of routing , etc. FIRST COME FIRST SERVE by personal Email (not PM's).

Email all4trux@snip.net

I have paypal or accept money orders.

Major Items that I have already priced out .



$79 - Complete Silverado grille & both H/L bezels (stacked ,quad lights
type) all argent color repainted & has black bar through center. Nice
stainless trim.. correct for 85-87 truck or 85-88 K5 & Burbs & 1 tons. Also
is direct replacement in place of 83-84 grille in all models. OS1 or OS2
$49 - Complete Silverado grille , had small repair done that is not
noticeable unless looking for it. correct for 85-87 truck or 85-88 Blazer,
K5 & Burb. Also is direct replacement in place of 83-84 grille. OS1 or OS2

$59 - 4 pieces of grille trim( the stainless that surrounds the grille) the
top piece is NOS new and the other 3 pieces are in great shape. All pieces
will be buffed and be shinier than new. Correct for 83-87 Trucks and 83-88 1
tons, Blazers and Burbs.

$79 - Elect. window motor conversion,SOLD for rear tailgate. includes full wiring and front & rear switches/handle etc. SOLD


$99 for both sides , one piece, factory dark tint windows for side of cap , NOT a
film. $20 for crate building
to get them there unbroken. Crated windows will be OS2

$49 -SOLD Pair of factory' Dumbo ear' stainless mirrors. This price will include the gaskets , all screws the hard to find stiffeners for the door so they won't shake. If yours does not already have them I can take measurements for holes also. There are 2 SMALL dings in the right side mirror .Mirror glass is clean also. Right side has the convex glass for greater viewing area. SOLD

$49 - factory gray console, has the typical cracks across the back where the hinge is . The rest of it is in great shape. I may have the key for it ?

$129- Tilt steering column with very tight knuckle, black color with key.Fits 84-87 Trucks and 84-91 Blazers & burbs & 1 tons. Can be shipped reasonably priced by removing stalks that are easy to re-install.

$39 - Blazer /Jimmy Headliner trim in PAINTED gray color. All the plastic pieces labled and with installation screws, they were that factory off white colored that the previous owner sprayed with a gray that matches the factory gray gut nicely. visors included for $10 more.

$39 - Blazer /Jimmy gray Front only seat belts. SOLD!The driver side one is frayed on edge in the chest area but not what I consider unsafe, just heavily used. They are pretty clean for age with good color and the plastic risers that come up near the console are not broken like some of this age.
Gray belts are a good seller but because of the fraying I will be selling these a little cheaper. 81-87 SOLD!

$39 -SOLD! Pair of wet arm style wipers with all the parts you need to convert your earlier truck to this style. Will include pic of routing of tubing.These work a lot nicer than the spray nozzles.Blades still good. 81-87
should work on 73-80 also.SOLD!

$29 - Black plastic instrument cluster bezel. Not hacked around radio or
cracked anywhere, has silver accent around holes. Fits 84-87
Trucks and 84-91 Blazers & Burbs & 1 tons. OS1

$89 -Silverado style dash bezel from a 90 that has the factory larger. open radio hole for DIN 'face' style radios. Fits any 84-91 K5 . this looks absolutely brand new.

$39 -SOLD instrument cluster with good working gauges . 80- 87 style numbers and
elect oil pressure. No tach or clock. SOLD


$49 - Gray interior panels in rear area , very nice. No cuts or water
damage. Have factory speaker grilles. 73-87. these were also brush painted by previous owner and actually look pretty good. the paint did not flake off when i twisted them to remove.? SCRAPPED THEM <TOO LARGE TO SHIP!

$99 - Gray cloth rear seat. Perfect .This may be UPSable in two OS1 Pieces.81-88 style fabric. SCRAPPED

$279- perfect pair of gray cloth seats with pedestals & console from a 91. these mount differently from earlier years.(but easy). PIcked up here only on these.

$79 - SINGLE factory BLUE vinyl high back bucket . Perfect condition , either side . Will go UPS in a single box OS2 size .

$19 -pair of matching door locks with key.

$19 - pair of the factory speaker mounts with working speakers in front for up in dash.

$19 SOLD pair of the stainless visors that go over the side windows. they will be buffed up nice.SOLD

$29 -Front Windshield cowl with plastic screen .



There are lots of good sheet metal parts and other things that are too large
to ship. Excellent hood and fenders. Good 700R4, good 208C transfer case.
Pair of 3.08 rears . Good glass including windshield. Decent right door.
I use U.P.S. unless it's under 5 lbs. And I may use Postal.

UPS has sizing parameters and OS1 Means oversize #1= 85-108" in girth. OS2 =is their limit and is 109-130" in girth. .
I have NO fed-ex depots near me But will take larger items for more than $100 to them, they are 1/3 cheaper price of UPS on larger items.


I give honest descriptions and can take pics of anything. If you call please
do so before 9pm EST. IF you Email me please be very specific about
who/what/where because I have tons of parts on the net For Sale Everywhere!

[bigblock73]

Dave, do you have the rear sill plate that hold the carpet down in the rear (back by the TG)? Mine is all banged/dented up...if you have one and it is clean I would be interested.

Thanks - Jeff

[crossy]

I think it fell out through the big hole back there . that was the only place this blazer was rotted bad. DAVE

[1Low76jimmy]

I need the Piece of Thin Metal that goes between the tailgate & the rear Bumper, bolts to the Frame. I also need the rear Carpet Hold Down, bolts up by the rear Tailgate.

[crossy]

I have the filler panel for bumper. the other piece you ask for is gone . email me personally at all4trux@snip.net . DAVE

[firemedicsafd]

i want the body tub. if you want you can sell it to me now or we can wait till it gets stripped bare. either way...i need a tub that doesnt have rust all over it. can you email me some pics of it?

[ItsNotABlazer]

Would you have a rear spoiler or wind deflector that mounts on the top above back glass? If so how much shipped to 75460 Zip code? I realize you may not want to sell just that part if you have someone interested in the complete top.

Thanks
Brad

[crossy]

When i get back from vaca on the 30th she shes the torch :-) .
I saved even some of the small unusual things, so ask. I have another 86 K5 coming also.

I just got some free lumber so anyone that wants the side windows can get free crating. DAVE

[bigblock73]

Dave, just e-mailed you.

...Jeff