This followed me home today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kman · 07-20-2003, 07:48 PM

71 Blazer with GMC clip was rolled needs windshield frame, floors, rockers, engine, but the rear quarters are good so is all but about 4" of bed. sorry to show the F**d but thats all I had to tow it with. 150 miles and only lost one tire on the trailer, it was some load for the four banger in the Ranger but we made it. Well this adds another project to the list. lol

Kman · 07-20-2003, 07:50 PM

maybe to big of a file

1970blazin · 07-20-2003, 07:58 PM

I am parting out a 71 blazer that sounds like it would complete your rig- Wish you were closer!

ddsmith · 07-20-2003, 08:03 PM

Kman,
You need to use a photo host. Longhornmail directed me to this site. http//www.digitalpose.com they will host 25MB for free. Then when the picture is on the digitalpose sight open the full size picture and right click, select properties and copy the http line from the properties window. Do this by highlighting it with the mouse then press the CTRL key and the C key at the same time. Then when making your message select the IMG button at the top of the page and press the CTRL key and the V key at the same time. This should copy the picture addressinto your message as an image and all should be good.

Kman · 07-20-2003, 08:09 PM

how do I resize the pic ?

ddsmith · 07-20-2003, 08:30 PM

Why resize it? If you have a link to it I can resize it for you in Corel. What size is the file?

Kman · 07-20-2003, 08:31 PM

[ [IMG]v396416_4884464018235889404_v.jpg[/IMG]

ddsmith · 07-20-2003, 08:35 PM

Kman,
The picture needs to be host on another site. If you e-mail me the picture I'll put it on my digitalpose album and get it on for you. My e-mail is ddsmith60@comcast.net

Kman · 07-20-2003, 08:36 PM

I'm doing something wrong. Its 10123bytes I tried photo host

ddsmith · 07-20-2003, 08:40 PM

Some sites will not allow you to post pictures directly to boards like this one. I know digitalpose does. The picture address you tried to use had a 67-72chevytrucks starting address and I know that doesn't work now.

ddsmith · 07-20-2003, 08:45 PM

Here you go Kman,

teeitup · 07-20-2003, 08:50 PM

Man I bet that was a pull for that little f**d!

Kman · 07-20-2003, 08:55 PM

ddsmith thanks again

yeah it was a pull, couldn't get it over 55 or into 5th. Boy did those cars and trucks fly by on 95 south

I'm going to change the front clip back to chevy as I have a good one to put on . so I will be selling these GMCfenders and grill which are in great shape. I'll try to get them off next week and post pics on parts board ( with smaller file size, I thought I changed the camera

kman

casey · 07-20-2003, 10:35 PM

A guy will do anything to drag a nice old chevy home LOL, yeh that ranger must of been sucking wind, nice ranger though

2wdBlazer · 07-21-2003, 09:28 AM

KMAN- Nice grab. Keep an eye out for Blazers for me on your coast. I may be in the market for one soon.

JayDubBlazer · 07-21-2003, 09:59 AM

Even in that conditions blazers still look good

07-20-2003, 07:48 PM	#1
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	This followed me home today 71 Blazer with GMC clip was rolled needs windshield frame, floors, rockers, engine, but the rear quarters are good so is all but about 4" of bed. sorry to show the F**d but thats all I had to tow it with. 150 miles and only lost one tire on the trailer, it was some load for the four banger in the Ranger but we made it. Well this adds another project to the list. lol __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-20-2003, 07:50 PM	#2
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	maybe to big of a file __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-20-2003, 07:58 PM	#3
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Wish you were closer I am parting out a 71 blazer that sounds like it would complete your rig- Wish you were closer! Attached Images __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

07-20-2003, 08:03 PM	#4
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Kman, You need to use a photo host. Longhornmail directed me to this site. http//www.digitalpose.com they will host 25MB for free. Then when the picture is on the digitalpose sight open the full size picture and right click, select properties and copy the http line from the properties window. Do this by highlighting it with the mouse then press the CTRL key and the C key at the same time. Then when making your message select the IMG button at the top of the page and press the CTRL key and the V key at the same time. This should copy the picture addressinto your message as an image and all should be good. __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

07-20-2003, 08:09 PM	#5
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	how do I resize the pic ? __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-20-2003, 08:30 PM	#6
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Why resize it? If you have a link to it I can resize it for you in Corel. What size is the file? __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

07-20-2003, 08:31 PM	#7
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	[ [IMG]v396416_4884464018235889404_v.jpg[/IMG] __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-20-2003, 08:35 PM	#8
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Kman, The picture needs to be host on another site. If you e-mail me the picture I'll put it on my digitalpose album and get it on for you. My e-mail is ddsmith60@comcast.net __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

07-20-2003, 08:36 PM	#9
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	I'm doing something wrong. Its 10123bytes I tried photo host __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-20-2003, 08:40 PM	#10
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Some sites will not allow you to post pictures directly to boards like this one. I know digitalpose does. The picture address you tried to use had a 67-72chevytrucks starting address and I know that doesn't work now. __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

07-20-2003, 08:45 PM	#11
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Here you go Kman, __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

07-20-2003, 08:50 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Man I bet that was a pull for that little f**d! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2003, 08:55 PM	#13
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	ddsmith thanks again yeah it was a pull, couldn't get it over 55 or into 5th. Boy did those cars and trucks fly by on 95 south I'm going to change the front clip back to chevy as I have a good one to put on . so I will be selling these GMCfenders and grill which are in great shape. I'll try to get them off next week and post pics on parts board ( with smaller file size, I thought I changed the camera kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect Last edited by Kman; 07-20-2003 at 09:03 PM.

07-20-2003, 10:35 PM	#14
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	A guy will do anything to drag a nice old chevy home LOL, yeh that ranger must of been sucking wind, nice ranger though

07-21-2003, 09:28 AM	#15
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,213	KMAN- Nice grab. Keep an eye out for Blazers for me on your coast. I may be in the market for one soon. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.



Register or Log In To remove these advertisements.

07-21-2003, 09:59 AM	#16
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Even in that conditions blazers still look good __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

Register or Log In To remove these advertisements.