|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-24-2011, 12:21 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 32
|
Missing Oil Dipstick Tube Bolt
I am missing the bolt that attaches the dipstick tube to the engine. Does anyone know the size of this bolt or where I can get one.
__________________
86 C20 2wd with 454 and Turbo 400 |
|
|
|
04-24-2011, 12:46 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Missing Oil Dipstick Tube Bolt
i dont have my truck with me but doesnt that bolt up to one of the exhaust manifolds the head of that bolt is 1/2 inch or 9/16 and is about 2 1/2 inches long
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
04-24-2011, 01:07 PM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 32
|
Re: Missing Oil Dipstick Tube Bolt
There is an opening just above where the exhaust manifold attaches on the engine block. I tried a 1/2 in bolt and it was close but just a bit to big.
__________________
86 C20 2wd with 454 and Turbo 400 |
|
|
|
|
04-25-2011, 10:12 PM
|
#4 |
|
Registered User
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 32
|
Re: Missing Oil Dipstick Tube Bolt
Still having problems with this. I tried 3/8 and 5/16. The 3/8 was very close but a bit to big. 5/16 is way to small. It seems like 9mm it about the correct size. Did Chevy use 9mm bolts in 86 on the 454? Can anyone help me with this I am really stuck.
__________________
86 C20 2wd with 454 and Turbo 400 |
|
|
|
|
04-26-2011, 10:09 PM
|
#5 |
|
Registered User
Join Date: Jan 2009
Location: Canada
Posts: 308
|
Re: Missing Oil Dipstick Tube Bolt
The dipstick tube should bolt on with one of the 3/8's exhaust manifold bolts.
|
|
|
|
|
04-27-2011, 12:28 AM
|
#6 |
|
Registered User
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 32
|
Re: Missing Oil Dipstick Tube Bolt
Thank you very much. I was starting to think that was the solution. Looks like someone had pulled some accessory or bracket from the engine and the hole was very close to where the dipstick mounted. Had me all confused.
On the bottom of the dipstick tube there is a round bevel that I guess is supposed to stop the dipstick tube from going all the way in the oil pan. On mine I have about an inch between the round bevel and the tip of the opening for the dipstick tube. Am I supposed to push the dipstick tube in further?
__________________
86 C20 2wd with 454 and Turbo 400 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
