Air bag bolt part number? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 04-27-2011, 07:06 PM

Hello,

Does anyone know the part number to this (see picture)?

**PGSigns** · 04-27-2011, 08:51 PM

I just measured what I needed and got mine from the local bolt supplier. They had the big washers but not the fancy aluminum one like in the picture. If memory serves me mine were 3/8 16 X 4 1/2 and I used a grade 8 bolt.
Jimmy

djw32 · 04-27-2011, 11:29 PM

Thanks.

I would really like to use what's in the picture. The washer and bolt in the picture looks like a clean install.

slimneverdies · 04-27-2011, 11:47 PM

x2. I've been looking all over
Posted via Mobile Device

gringoloco · 04-28-2011, 08:30 AM

The aluminum washer in MrShelley's pic is a custom piece. The bolt is as stated above. Look for SBC harmonic balancer washers- they are thick, hardened, and the right size...

chapster · 04-28-2011, 12:17 PM

If you have a machine shop in your area get them to machine a couple on the lathe.......

djw32 · 04-28-2011, 05:43 PM

Quote:

Originally Posted by gringoloco

The aluminum washer in MrShelley's pic is a custom piece. The bolt is as stated above. Look for SBC harmonic balancer washers- they are thick, hardened, and the right size...

This is perfect! I totally forgot about the SBC harmonic balance washer. Would you recommend running only one washer per side?

72MARIO · 04-28-2011, 11:31 PM

I also used the harmonic balancer washer and 4" bolt. I think it should be oky. Would like to have a bigger bolt going into the bag though....

SCOTI · 04-29-2011, 12:50 AM

Quote:

Originally Posted by 72MARIO

I also used the harmonic balancer washer and 4" bolt. I think it should be oky. Would like to have a bigger bolt going into the bag though....

The same size bolts hold the front bags in place.....

gringoloco · 04-29-2011, 01:10 AM

Quote:

Originally Posted by 72MARIO

...Would like to have a bigger bolt going into the bag though....

You could drill for the other two holes and use short bolts through the upper flange of the arms. Would be overkill, but good for peace of mind...
Posted via Mobile Device

tubbedII · 04-29-2011, 03:15 PM

Quote:

Originally Posted by gringoloco

You could drill for the other two holes and use short bolts through the upper flange of the arms. Would be overkill, but good for peace of mind...
Posted via Mobile Device

Aren't the bolt holes in the top and bottom of the bag in-line with each other?

SCOTI · 04-29-2011, 04:02 PM

Quote:

Originally Posted by tubbedII

Aren't the bolt holes in the top and bottom of the bag in-line with each other?

Some are; some aren't.

72MARIO · 04-29-2011, 07:43 PM

I know that the front bags are held in by two 3/8" bolts. The back "should" be oky I am slightly concerned with the bottom having only one 4' x 3/8" bolt. Probibly will never be a problem.

I think a plate could be made with room to bolt the two 3/8" bolts into the bags and have a 1/2" x 4" stud going through the trailing arm. Mabye over thinking it ?

I like how the post have ending....................................

04-27-2011, 07:06 PM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Air bag bolt part number? Hello, Does anyone know the part number to this (see picture)? Attached Images

04-27-2011, 08:51 PM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Air bag bolt part number? I just measured what I needed and got mine from the local bolt supplier. They had the big washers but not the fancy aluminum one like in the picture. If memory serves me mine were 3/8 16 X 4 1/2 and I used a grade 8 bolt. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

04-27-2011, 11:29 PM	#3
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Air bag bolt part number? Thanks. I would really like to use what's in the picture. The washer and bolt in the picture looks like a clean install.

04-27-2011, 11:47 PM	#4
slimneverdies Registered User Join Date: Apr 2006 Location: Miami now in Vegas Posts: 828	Re: Air bag bolt part number? x2. I've been looking all over Posted via Mobile Device __________________ Long live SLIM ------------------ At least try to buy American

04-28-2011, 08:30 AM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Air bag bolt part number? The aluminum washer in MrShelley's pic is a custom piece. The bolt is as stated above. Look for SBC harmonic balancer washers- they are thick, hardened, and the right size... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-28-2011, 12:17 PM	#6
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Air bag bolt part number? If you have a machine shop in your area get them to machine a couple on the lathe....... __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

04-28-2011, 11:31 PM	#8
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Air bag bolt part number? I also used the harmonic balancer washer and 4" bolt. I think it should be oky. Would like to have a bigger bolt going into the bag though.... __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

04-29-2011, 07:43 PM	#13
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Air bag bolt part number? I know that the front bags are held in by two 3/8" bolts. The back "should" be oky I am slightly concerned with the bottom having only one 4' x 3/8" bolt. Probibly will never be a problem. I think a plate could be made with room to bolt the two 3/8" bolts into the bags and have a 1/2" x 4" stud going through the trailing arm. Mabye over thinking it ? I like how the post have ending.................................... __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.