CA Parting 85 custom deluxe 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 04-24-2011, 07:52 PM

Here's a 1/2 ton 2wd long bed that has water mixed with oil and CA DMV paperwork problems. The sheet metal is super clean (no rust) and the interior is pretty clean too. I will be making a trailer out of the back end. I'll give 2 days after I answer a question on a part and then it goes to the next in line. The steering pump/box and door mirrors are sold.
THE COMPLETE CAB AND FRONT SHEET METAL HAS BEEN SOLD LOCALLY
700R4- $300 local

5 lug disc brake changeover- $150 local

auto column with key- $40 plus shipping SOLD

seat with small tear- $60 local

tan door panels- $30 plus shipping SOLD

instrument bezel- $25 plus shipping SOLD

rear view mirror- $16 shipped SOLD

seat belts- $32 shipped SOLD

washer bottle with pump- $10 plus shipping

Please respond in thread to avoid confusion.
Thanks,
Ray

KrazyRay · 04-24-2011, 07:59 PM

pics

RandyP · 04-24-2011, 08:10 PM

Is it expensive to ship the door panels? I'm rather naive about shipping really. I know the trim panels are not correct for a 79, but they should fit, right? Interested in the trim panels though.

I'm also needing the caps that go on the A/C line connections, both high and low.

Zip is 74055 business address, if it matters.

**ScottH** · 04-24-2011, 10:56 PM

Hey Ray, what kind of shape is the drivers side headlight bezel in?
Can u post a close up of it if in good shape?

BTW looking for an 84 GMC owners manual if u should come across one.

Thanks
Scott

thomas_a_reed · 04-25-2011, 10:33 AM

Are the frame mounts for the gas tank still in good shape? and how much to ship them to 45714.

KrazyRay · 04-25-2011, 11:03 AM

RandyP- Its about $20 to ship panels...not sure if they fit 79

Scott- I will get pics

thomas a reed- I have many good tank mounts...$40 shipped for one tank or $65 for 2

Thanks,
Ray

RandyP · 04-25-2011, 02:26 PM

Did more research, yes they'll fit if I change the door handles. Guess I'll pass on them even though they're 100% better looking than what I got.

Any idea on some A/C line caps? The plastic caps you take off to hook the gauges/AC machine up to so you can evac and charge etc.

KrazyRay · 04-25-2011, 11:56 PM

Quote:

Originally Posted by RandyP

Did more research, yes they'll fit if I change the door handles. Guess I'll pass on them even though they're 100% better looking than what I got.

Any idea on some A/C line caps? The plastic caps you take off to hook the gauges/AC machine up to so you can evac and charge etc.

RandyP- pm me your shipping address and the caps are yours.

KrazyRay · 04-26-2011, 11:42 AM

Quote:

Originally Posted by ScottH

Hey Ray, what kind of shape is the drivers side headlight bezel in?
Can u post a close up of it if in good shape?

BTW looking for an 84 GMC owners manual if u should come across one.

Thanks
Scott

Scott, The bezel is no good.

**ScottH** · 04-26-2011, 10:20 PM

No problem Ray, thanks for checkin.

fishingjred73 · 04-30-2011, 02:13 PM

Ray what kind of shape are the fender emblems in?

Never mind just saw the front sheet metal was sold. Thanks

edge · 05-01-2011, 07:35 AM

I'm interested in the door panels. how much? 40356

KrazyRay · 05-01-2011, 11:32 AM

A local guy bought the complete cab with doors...I will ask if he needs the panels.
Thanks,
Ray

shortbed70 · 05-01-2011, 12:41 PM

Is the dash pad in good shape? Shipped to 66535
Posted via Mobile Device

KrazyRay · 05-01-2011, 03:40 PM

Sorry, The pad is junk.
Thanks,
Ray

*scottsdaleowner75* · 05-01-2011, 11:38 PM

How are the exhaust manifolds? I know i was trying to get the ones from the 78 but these might work better since the 78's were cracked. PM inbound

04-24-2011, 07:52 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 85 custom deluxe 10 Here's a 1/2 ton 2wd long bed that has water mixed with oil and CA DMV paperwork problems. The sheet metal is super clean (no rust) and the interior is pretty clean too. I will be making a trailer out of the back end. I'll give 2 days after I answer a question on a part and then it goes to the next in line. The steering pump/box and door mirrors are sold. THE COMPLETE CAB AND FRONT SHEET METAL HAS BEEN SOLD LOCALLY 700R4- $300 local 5 lug disc brake changeover- $150 local auto column with key- $40 plus shipping SOLD seat with small tear- $60 local tan door panels- $30 plus shipping SOLD instrument bezel- $25 plus shipping SOLD rear view mirror- $16 shipped SOLD seat belts- $32 shipped SOLD washer bottle with pump- $10 plus shipping Please respond in thread to avoid confusion. Thanks, Ray Attached Images Last edited by KrazyRay; 04-25-2011 at 12:52 PM.

04-24-2011, 07:59 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 85 custom deluxe 10 pics Attached Images

04-24-2011, 08:10 PM	#3
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Parting 85 custom deluxe 10 Is it expensive to ship the door panels? I'm rather naive about shipping really. I know the trim panels are not correct for a 79, but they should fit, right? Interested in the trim panels though. I'm also needing the caps that go on the A/C line connections, both high and low. Zip is 74055 business address, if it matters. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools. Last edited by RandyP; 04-24-2011 at 09:47 PM.

04-24-2011, 10:56 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 85 custom deluxe 10 Hey Ray, what kind of shape is the drivers side headlight bezel in? Can u post a close up of it if in good shape? BTW looking for an 84 GMC owners manual if u should come across one. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 04-24-2011 at 10:58 PM.

04-25-2011, 10:33 AM	#5
thomas_a_reed Registered User Join Date: Feb 2011 Location: belpre ohio Posts: 78	Re: Parting 85 custom deluxe 10 Are the frame mounts for the gas tank still in good shape? and how much to ship them to 45714. __________________ 66 CHEVY STEPSIDE 2WD W/283 ( FAMILY HAND ME DOWN) 81 CHEVY SHORT BED 2WD W/250 4SPD TRANS STRAIGHT 6 ( CURRENTLY UNDER CONSTRUCTION) 01 SILVERADO SHORT BED 2WD W/4.3 5SPD TRANS ( DAILY DRIVER) Sold 03 SIERRA 4X4 STEP SIDE EXTRA CAB 5.3 AUTO( NEW DD) 09 CHEVY COBALT W2.2 AUTO (GF'S DAILY DRIVER)

04-25-2011, 11:03 AM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 85 custom deluxe 10 RandyP- Its about $20 to ship panels...not sure if they fit 79 Scott- I will get pics thomas a reed- I have many good tank mounts...$40 shipped for one tank or $65 for 2 Thanks, Ray

04-25-2011, 02:26 PM	#7
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Parting 85 custom deluxe 10 Did more research, yes they'll fit if I change the door handles. Guess I'll pass on them even though they're 100% better looking than what I got. Any idea on some A/C line caps? The plastic caps you take off to hook the gauges/AC machine up to so you can evac and charge etc. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

04-26-2011, 10:20 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 85 custom deluxe 10 No problem Ray, thanks for checkin. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-30-2011, 02:13 PM	#11
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: Parting 85 custom deluxe 10 Ray what kind of shape are the fender emblems in? Never mind just saw the front sheet metal was sold. Thanks __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/ Last edited by fishingjred73; 04-30-2011 at 02:15 PM. Reason: reread ad

05-01-2011, 07:35 AM	#12
edge Registered User Join Date: Nov 2006 Location: ky Posts: 89	Re: Parting 85 custom deluxe 10 I'm interested in the door panels. how much? 40356

05-01-2011, 11:32 AM	#13
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 85 custom deluxe 10 A local guy bought the complete cab with doors...I will ask if he needs the panels. Thanks, Ray

05-01-2011, 12:41 PM	#14
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Parting 85 custom deluxe 10 Is the dash pad in good shape? Shipped to 66535 Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-01-2011, 03:40 PM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 85 custom deluxe 10 Sorry, The pad is junk. Thanks, Ray

05-01-2011, 11:38 PM	#16
scottsdaleowner75 Account Suspended Join Date: Mar 2010 Location: So. Cal, Inland Empire Posts: 199	Re: Parting 85 custom deluxe 10 How are the exhaust manifolds? I know i was trying to get the ones from the 78 but these might work better since the 78's were cracked. PM inbound



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.