Need input because I'm still not sure? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

romarti0825 · 04-19-2011, 07:32 PM

I had originally purchased the woodgrain molding to add to my Blazer but after it was all painted I was against putting it on. Now I'm having second thoughts and am seriously thinking about adding it. What do you think? Here's a couple of pictures.

matthew79 · 04-19-2011, 07:40 PM

Here's my opinion:

lifted 4x4 = no trim or tailgate band
lowered 2x4 = both

So if it were mine I'd put it on!

BIGBLU 72 · 04-19-2011, 11:57 PM

nah i think it looks great! maybe the black trim?

TheCanadianJedi · 04-20-2011, 12:23 AM

I went through the same struggle. Most of my friends said no trim at all! But since I already had it I taped it on to one side and stood back. It helped a lot to make the decision.

hotrodhomi · 04-20-2011, 01:10 AM

I love the trim. I would like to add the black trim to mine. Tape it on and you'll be able to decide for yourself.

heeroyue2002 · 04-20-2011, 01:26 AM

my friend wants to get the trim air brushed on.

C/10 King · 04-20-2011, 10:12 AM

You forgot to tell everybody that you have the tailgate band and the glove box wood grain all ready started,

you ding dong, up load a rear view photo to show how nice it looks already, then get to work, trust me the finished project will look good!

Raider Rudy · 04-20-2011, 11:29 AM

I'm baca

MrGoodpliers · 04-20-2011, 04:34 PM

Tape them on and ponder it. I would use it. Lower trim only has an effect of visually pulling the truck down. Great for a lowered 2wd Blazer.

FRENCHBLUE72 · 04-24-2011, 12:34 PM

I hate the wood trim look myself but I think I would just tape it on and see if you like it or not.

**leddzepp** · 04-24-2011, 12:37 PM

Tape it on and see how it looks. Can't go wrong with those polished slots though!

turp mcspray · 05-02-2011, 09:34 PM

Woodgrain trim on these trucks is a "must have" item! JMHO!

hotrodhomi · 05-02-2011, 10:00 PM

so did you decide?

romarti0825 · 05-02-2011, 10:14 PM

Yeah. I'm gonna put it on but I'm going to use the adhesive clips so I don't have to drill holes.
Posted via Mobile Device

hotrodhomi · 05-02-2011, 10:31 PM

Quote:

Originally Posted by romarti0825

Yeah. I'm gonna put it on but I'm going to use the adhesive clips so I don't have to drill holes.
Posted via Mobile Device

I haven't heard of those clips. Do you have a link? They sound like a great idea.

romarti0825 · 05-03-2011, 12:31 AM

I don't have a link but i saw them in the 'Truck Shop' catalog. My uncle the C/10 King told me about them. He might have a little more info.
Posted via Mobile Device

hotrodhomi · 05-03-2011, 12:52 AM

I found that the LMC kit has some stick on fasteners, but I would like to know how many holes will still need to be drilled if any.

99-LS1-SS · 05-03-2011, 03:27 PM

I like the clean look without the molding.

04-19-2011, 07:32 PM	#1
romarti0825 Registered User Join Date: Jul 2008 Location: Rancho Cucamonga CA Posts: 242	Need input because I'm still not sure? I had originally purchased the woodgrain molding to add to my Blazer but after it was all painted I was against putting it on. Now I'm having second thoughts and am seriously thinking about adding it. What do you think? Here's a couple of pictures. Attached Images __________________ '72 Cheyene short fleet. '70 2wd Blazer

04-19-2011, 07:40 PM	#2
matthew79 Registered User Join Date: Jun 2010 Location: Surprise, AZ Posts: 381	Re: Need input because I'm still not sure? Here's my opinion: lifted 4x4 = no trim or tailgate band lowered 2x4 = both So if it were mine I'd put it on!

04-19-2011, 11:57 PM	#3
BIGBLU 72 Registered User Join Date: Dec 2008 Location: Ashland, KY Posts: 700	Re: Need input because I'm still not sure? nah i think it looks great! maybe the black trim? __________________ 68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD

04-20-2011, 12:23 AM	#4
TheCanadianJedi Registered User Join Date: Apr 2011 Location: Grande Prairie,Alberta Posts: 5	Re: Need input because I'm still not sure? I went through the same struggle. Most of my friends said no trim at all! But since I already had it I taped it on to one side and stood back. It helped a lot to make the decision.

04-20-2011, 01:10 AM	#5
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Need input because I'm still not sure? I love the trim. I would like to add the black trim to mine. Tape it on and you'll be able to decide for yourself. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

04-20-2011, 01:26 AM	#6
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: Need input because I'm still not sure? my friend wants to get the trim air brushed on. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

04-20-2011, 10:12 AM	#7
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Need input because I'm still not sure? You forgot to tell everybody that you have the tailgate band and the glove box wood grain all ready started, you ding dong, up load a rear view photo to show how nice it looks already, then get to work, trust me the finished project will look good! __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze" Last edited by C/10 King; 04-20-2011 at 11:34 AM.

04-20-2011, 11:29 AM	#8
Raider Rudy Registered User Join Date: Jan 2008 Location: Riverside, Ca. Posts: 241	Re: Need input because I'm still not sure? I'm baca __________________ 1969 Chevy Long Fleet Custom C/10 (2nd owner) 1971 Chevy Short Fleet Custom C/10 (2nd owner) 2001 Chevy Silverado Ext Cab

04-20-2011, 04:34 PM	#9
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Need input because I'm still not sure? Tape them on and ponder it. I would use it. Lower trim only has an effect of visually pulling the truck down. Great for a lowered 2wd Blazer. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

04-24-2011, 12:34 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Need input because I'm still not sure? I hate the wood trim look myself but I think I would just tape it on and see if you like it or not. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-24-2011, 12:37 PM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,033	Re: Need input because I'm still not sure? Tape it on and see how it looks. Can't go wrong with those polished slots though! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

05-02-2011, 09:34 PM	#12
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Need input because I'm still not sure? Woodgrain trim on these trucks is a "must have" item! JMHO! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

05-02-2011, 10:00 PM	#13
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Need input because I'm still not sure? so did you decide? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-02-2011, 10:14 PM	#14
romarti0825 Registered User Join Date: Jul 2008 Location: Rancho Cucamonga CA Posts: 242	Re: Need input because I'm still not sure? Yeah. I'm gonna put it on but I'm going to use the adhesive clips so I don't have to drill holes. Posted via Mobile Device __________________ '72 Cheyene short fleet. '70 2wd Blazer

05-03-2011, 12:31 AM	#16
romarti0825 Registered User Join Date: Jul 2008 Location: Rancho Cucamonga CA Posts: 242	Re: Need input because I'm still not sure? I don't have a link but i saw them in the 'Truck Shop' catalog. My uncle the C/10 King told me about them. He might have a little more info. Posted via Mobile Device __________________ '72 Cheyene short fleet. '70 2wd Blazer



Register or Log In To remove these advertisements.

05-03-2011, 12:52 AM	#17
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Need input because I'm still not sure? I found that the LMC kit has some stick on fasteners, but I would like to know how many holes will still need to be drilled if any. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-03-2011, 03:27 PM	#18
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: Need input because I'm still not sure? I like the clean look without the molding.

Register or Log In To remove these advertisements.