TX Serpentine Belt setup for SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 04-15-2011, 09:50 AM

I have two or three for sale, still digging. $70. plus shipping.

here is one, it has a broken tab on right side top, but you see what it looks like. also I have two spoken for. this is for the brackets, no electronics.

71 bowties
I think they both come with the AC, but I will look again.

TX Firefighter

both these guys have spoken up so far.

PM's sent to both of these guys.

Tx Firefighter · 04-15-2011, 10:38 AM

So we're looking at a set with power steering and a/c but no alternator ? Does that include crank and water pump pulleys too ? I'm converting fron v belts so I'll need all I can get up to and including fan if possible.
Posted via Mobile Device

**Clyde65** · 04-15-2011, 10:50 AM

Sorry, I know I dont have the ac and alt's, I have that one PS pump you see there. I will dig every thing out this weekend and PM you what I have.

Tx Firefighter · 04-15-2011, 11:33 AM

I'm in no hurry so just let me know what you come up with and we'll go from there. I could use those exhaust manifolds too if you've got a pair cheap enough. My daily driver had manifolds with AIR pump tubes but no pump. I'd like a set without that so they don't give me the beat down on inspection every year.

Tkmadone · 05-12-2011, 04:07 PM

I'm looking for a serpentine setup as well if you have any others.

Thanks

**Clyde65** · 05-12-2011, 05:20 PM

I will look and see if my friend has another.

04-15-2011, 09:50 AM	#1
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Serpentine Belt setup for SBC I have two or three for sale, still digging. $70. plus shipping. here is one, it has a broken tab on right side top, but you see what it looks like. also I have two spoken for. this is for the brackets, no electronics. 71 bowties I think they both come with the AC, but I will look again. TX Firefighter both these guys have spoken up so far. PM's sent to both of these guys. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 04-15-2011 at 10:01 AM.

04-15-2011, 10:38 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Serpentine Belt setup for SBC So we're looking at a set with power steering and a/c but no alternator ? Does that include crank and water pump pulleys too ? I'm converting fron v belts so I'll need all I can get up to and including fan if possible. Posted via Mobile Device __________________ I'm on the Instagram- @Gearhead_Kevin

04-15-2011, 10:50 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Serpentine Belt setup for SBC Sorry, I know I dont have the ac and alt's, I have that one PS pump you see there. I will dig every thing out this weekend and PM you what I have. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-15-2011, 11:33 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Serpentine Belt setup for SBC I'm in no hurry so just let me know what you come up with and we'll go from there. I could use those exhaust manifolds too if you've got a pair cheap enough. My daily driver had manifolds with AIR pump tubes but no pump. I'd like a set without that so they don't give me the beat down on inspection every year. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 04-15-2011 at 11:36 AM.

05-12-2011, 04:07 PM	#5
Tkmadone Registered User Join Date: Aug 2009 Location: Simi Valley, CA Posts: 193	Re: Serpentine Belt setup for SBC I'm looking for a serpentine setup as well if you have any others. Thanks

05-12-2011, 05:20 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Serpentine Belt setup for SBC I will look and see if my friend has another. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.