The "In over my head" build thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SeventyOne · 05-18-2011, 06:36 PM

Update 5/18

Here's what was delivered yesterday...
Name: Engine1.jpg
Views: 3189
Size: 90.8 KB

Name: Rockers1.jpg
Views: 3204
Size: 35.3 KB

Name: Rockers2.jpg
Views: 3207
Size: 36.8 KB

Name: Engine2.jpg
Views: 3244
Size: 90.6 KB

383, roller cam & rockers, aluminum heads, Edelbrock Performer RPM intake.

BaketownScotty: Yes, I and using the stock trans crossmember in the stock location. I had the trans built with the Advanced Adapters output shaft so it will bolt up to the NP205 behind it. The extra length that the 700r4 has over the Th350 will be accounted for by moving the engine and crossmember forward.

el3m3nt3l: Yes I really like the stock green color but I don't think it will end up being painted that color in the end...

05-18-2011, 06:36 PM	#10
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,382	Re: The "In over my head" build thread Update 5/18 Here's what was delivered yesterday... 383, roller cam & rockers, aluminum heads, Edelbrock Performer RPM intake. BaketownScotty: Yes, I and using the stock trans crossmember in the stock location. I had the trans built with the Advanced Adapters output shaft so it will bolt up to the NP205 behind it. The extra length that the 700r4 has over the Th350 will be accounted for by moving the engine and crossmember forward. el3m3nt3l: Yes I really like the stock green color but I don't think it will end up being painted that color in the end...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.