disk brakes on all 4 corners

[faribran]

i am attempting to put 4 wheel discs on a 1967 1/2 ton p/u.
my basic concern is what combination/proportioning valve are you guys using..
would like to be able to retain most of the stock brake lines...

any input would be great..

[lolife99]

http://www.performanceonline.com/GM-...-VALVES-PV672/

Part number PV2 is a disc/drum.
You need part number PV4 for 4-wheel disc brakes.

I would just purchase the entire M/C and prop valve combo.
These aluminum M/C are great and will look good for a long time.
You can paint them and not worry about them rusting later.
I would just leave it bare aluminum.
http://www.performanceonline.com/HIG...PVS-AMCPVS232/

[faribran]

thanks Keith.. i will take a look..

have a good holiday