![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
would this rim fit?
would this rim fit on a 72 2wd? I just need some temp rims that are larger than 15" and found a set of these for fairly cheap. I am using belltech 3" drop spindles and airbags (if that matters) and the 15's are rubbing the control arm.
http://vancouver.en.craigslist.ca/rd...406793582.html
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd Last edited by 72gmcshorty; 05-29-2011 at 05:53 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,305
|
Re: would this rim fit?
That's a single wheel and tire.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
Re: would this rim fit?
it's an example of the set i found....
![]()
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd Last edited by 72gmcshorty; 05-29-2011 at 06:54 PM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,305
|
Re: would this rim fit?
I had read that again and noticed that lol. They are all backspace, I'd just measure a little before you buy. Measure the center hole dia. and if you can get away with that backspace but I don't see why not. I'm running a 7in plus backspace on my 72 rearend and 72 front swap parts.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2007
Location: Fort Smith,AR
Posts: 1,305
|
Re: would this rim fit?
Also, it could be cheaper running a spacer up front. I had 3in spindles and 15x6 and used a spacer and longer studs and it didn't rub anymore. I also have bags so they came in contact in more than a set height.
Posted via Mobile Device |
![]() |
![]() |
![]() |
Bookmarks |
|
|