Finally made some progress, thought I'd share - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BossHogg69 · 05-10-2010, 01:05 AM

Just got my frame back from sandblasting/painting this weekend and finally got to install the CPP parts that were stacked up in my garage. I haven't started a build thread, but I have pics from the beginning of all this madness. I want to get a little closer to the final product before I start the build thread since it'll probably be another year or two before she's driving. This is my '69 in my signature below.

tr69c10 · 05-10-2010, 01:24 AM

Looks good just saw the the guys from ccp today at the long beach swapmeet you gotta see there show room

68Stepbed · 05-10-2010, 08:15 AM

VA72C10 · 05-10-2010, 08:39 AM

Looking good. Love a clean frame and suspension!!!

**70cst** · 05-10-2010, 08:45 AM

That is one good lookin frame.

my67chevytruck · 05-10-2010, 09:03 AM

looking good

BossHogg69 · 06-05-2011, 11:28 PM

Still no build thread, since this thing is taking forever it would just bore everyone to death... Here are some pics of the frame I from this weekend - the chassis is finally finished, (yes I should have added all the bracing before I had it painted the first time and it's things like this that make this build is take so long!) now it's time to start installing the mountain of parts I've acquired over the past year and a half!

oldblue1968chevy · 06-05-2011, 11:35 PM

looksreally good! does the bracing really help that much (not tryin to be a smart butt jw)?

BossHogg69 · 06-05-2011, 11:43 PM

Well, I dont' know the 'right' way to measure torsional rigidity, but I put my jack under the left front frame horn up where the bumper mounts and the left front tire only comes off the ground 3" before the other front tire lifts completely off the ground. I didn't try this in the back, put the frame overall seems pretty stiff. I mainly did this to keep everything from turning into a wet noodle when I drop the hammer on my roller cammed 468/5 spd combo when I go to the track or throw it hard into a corner.

05-10-2010, 01:05 AM	#1
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Finally made some progress, thought I'd share Just got my frame back from sandblasting/painting this weekend and finally got to install the CPP parts that were stacked up in my garage. I haven't started a build thread, but I have pics from the beginning of all this madness. I want to get a little closer to the final product before I start the build thread since it'll probably be another year or two before she's driving. This is my '69 in my signature below. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-10-2010, 01:24 AM	#2
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: Finally made some progress, thought I'd share Looks good just saw the the guys from ccp today at the long beach swapmeet you gotta see there show room

05-10-2010, 08:15 AM	#3
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Finally made some progress, thought I'd share __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

05-10-2010, 08:39 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Finally made some progress, thought I'd share Looking good. Love a clean frame and suspension!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-10-2010, 08:45 AM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Finally made some progress, thought I'd share That is one good lookin frame. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-10-2010, 09:03 AM	#6
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Finally made some progress, thought I'd share looking good __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-05-2011, 11:28 PM	#7
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Finally made some progress, thought I'd share Still no build thread, since this thing is taking forever it would just bore everyone to death... Here are some pics of the frame I from this weekend - the chassis is finally finished, (yes I should have added all the bracing before I had it painted the first time and it's things like this that make this build is take so long!) now it's time to start installing the mountain of parts I've acquired over the past year and a half! Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

06-05-2011, 11:35 PM	#8
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Finally made some progress, thought I'd share looksreally good! does the bracing really help that much (not tryin to be a smart butt jw)? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

06-05-2011, 11:43 PM	#9
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Finally made some progress, thought I'd share Well, I dont' know the 'right' way to measure torsional rigidity, but I put my jack under the left front frame horn up where the bumper mounts and the left front tire only comes off the ground 3" before the other front tire lifts completely off the ground. I didn't try this in the back, put the frame overall seems pretty stiff. I mainly did this to keep everything from turning into a wet noodle when I drop the hammer on my roller cammed 468/5 spd combo when I go to the track or throw it hard into a corner. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.