1967 bench seat - interchange with other years? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71swb4x4 · 06-16-2011, 10:26 PM

I want to get a new (used) bench seat for my 67. Anyone know if these interchange with other years? Mine is a fold forward bench and I want to stick with that. Did other years fold forward too or just 67's? I know neither of my 69's did, neither did my 71 or 72. What about 66 and earlier? Could I get a 66 and earlier and put my bench seat brackets on that?

BureauMan · 06-16-2011, 10:37 PM

I know my dad had a '66 model and the seat flipped forward on it.

**leddzepp** · 06-16-2011, 10:46 PM

67-72 bench seats will interchange with each other. I have seen some that flip forward, and others that are stationary. Year of the truck did not seem to matter.

**too much stuff** · 06-16-2011, 11:15 PM

Seems the 67s and alot of 68 seats flip. Not so much in the other years that i have seen...

**'68OrangeSunshine** · 06-17-2011, 02:28 AM

My original '68 bench seat flipped. I used to think I was hot with a Marlin .30-30 in a scabbard bunji-ed to the backseat springs. A couple of years later I traded that seat to a guy with a '66 GMC, for an electric bench bucket out of a '69 T-Bird. Used to work OK. Neat to trim the seatangle on long drives, but Ford electrics won out. It shorted out one time and I burned my hand on the fuse-able link I used for the ground lead.
If FORD made refrigerators, we'd all drink warm beer like the English.
The bench seat in my '67 K/10 Suburban had a closed back, but also would flip, if you pulled the wingnuts.

TrkEnvy · 06-17-2011, 02:37 AM

I have a flip forward bench out of a 66 I am planning on putting in my truck.. If it doesnt fit ill take a grinder and welder to the brackets.. My truck came with 80s lincoln towncar seats that were thrashed when I got it.

72freak · 06-17-2011, 07:35 AM

67-72 will all bolt down in the same place. Only differenc will be the back flipping forward and that really isnt necessary unless you have the tank out.

71swb4x4 · 06-17-2011, 08:12 PM

This seat is in my dump truck and we put the tarps between the seat and tank, so having the flip seat is nice. I may just get a regular 67-72 seat and then I can have the original one recovered at my leisure.

06-16-2011, 10:26 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	1967 bench seat - interchange with other years? I want to get a new (used) bench seat for my 67. Anyone know if these interchange with other years? Mine is a fold forward bench and I want to stick with that. Did other years fold forward too or just 67's? I know neither of my 69's did, neither did my 71 or 72. What about 66 and earlier? Could I get a 66 and earlier and put my bench seat brackets on that? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

06-16-2011, 10:37 PM	#2
BureauMan Registered User Join Date: Mar 2011 Location: Statesville, NC Posts: 24	Re: 1967 bench seat - interchange with other years? I know my dad had a '66 model and the seat flipped forward on it.

06-16-2011, 10:46 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: 1967 bench seat - interchange with other years? 67-72 bench seats will interchange with each other. I have seen some that flip forward, and others that are stationary. Year of the truck did not seem to matter. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

06-16-2011, 11:15 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,720	Re: 1967 bench seat - interchange with other years? Seems the 67s and alot of 68 seats flip. Not so much in the other years that i have seen... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-17-2011, 02:28 AM	#5
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,246	Re: 1967 bench seat - interchange with other years? My original '68 bench seat flipped. I used to think I was hot with a Marlin .30-30 in a scabbard bunji-ed to the backseat springs. A couple of years later I traded that seat to a guy with a '66 GMC, for an electric bench bucket out of a '69 T-Bird. Used to work OK. Neat to trim the seatangle on long drives, but Ford electrics won out. It shorted out one time and I burned my hand on the fuse-able link I used for the ground lead. If FORD made refrigerators, we'd all drink warm beer like the English. The bench seat in my '67 K/10 Suburban had a closed back, but also would flip, if you pulled the wingnuts. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

06-17-2011, 02:37 AM	#6
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: 1967 bench seat - interchange with other years? I have a flip forward bench out of a 66 I am planning on putting in my truck.. If it doesnt fit ill take a grinder and welder to the brackets.. My truck came with 80s lincoln towncar seats that were thrashed when I got it.

06-17-2011, 07:35 AM	#7
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1967 bench seat - interchange with other years? 67-72 will all bolt down in the same place. Only differenc will be the back flipping forward and that really isnt necessary unless you have the tank out. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

06-17-2011, 08:12 PM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: 1967 bench seat - interchange with other years? This seat is in my dump truck and we put the tarps between the seat and tank, so having the flip seat is nice. I may just get a regular 67-72 seat and then I can have the original one recovered at my leisure. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.