CA 67 Seatbelts, Parts lots, hubcaps, misc. for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 06-12-2011, 03:19 AM

Clearing out some parts not needed in my build. First "I'll take it" gets it.

1. 67 Seatbelts. One belt is missing, but still have the buckle. There are also (3) 7/16 20 (fine thread) bolts included. The bolts fit the floor of 67 cabs, as well as the threaded pillars on all 67-72 trucks. $50 Shipped SOLD

2. Large parts lot. Includes pancake bumpstops, upper rear shock mounts for a coil sprung 2WD truck, deluxe wiper knob, a pair of door pillar plugs, driver OEM taillight lens, factory u-bolts for coil sprung trucks, console delete seatbelt holders, one new power steering pitman arm seal, woodgrain cab corner moulding, tilt column shifter from a van (shorter than truck, works well for smaller diameter steering wheels), glovebox button (small set screw is missing from the bracket), blue seat belt buckle with nice GM button, 67 ashtray, and all 3 emblems have intact studs and some have the nuts still attached. $40 Shipped

3. OEM starter from a 72 big block. It is an AC Delco, but has a Napa gold sticker on it, so is a reman. Worked in my truck, but have now upgraded to a mini starter and no longer need this one. Includes grade 8 mounting bolts. This is for a staggered mount. $35 Shipped

4. 3 Hubcaps. All are driver quality. All are for a 1/2 ton truck. $35 Shipped

5. One Rallye wheel center cap and Tailgate hinges/trunions/hardware. $30 Shipped SOLD pending payment

6. OEM headliner trim. Poor shape, the only unbroken pieces are the two front ones. Even they have some broken tabs on the backside. $25 Shipped SOLD LOCALLY

**leddzepp** · 06-12-2011, 03:22 AM

Mas fotos

Fesser · 06-12-2011, 10:07 AM

I'll take the seat belts. Going back to look at the rest...

Fesser · 06-12-2011, 10:23 AM

would love to have the radio knobs but don't need any of the rest of that lot. In case you break it up. Let me know how to pay for the belts. Frank

**leddzepp** · 06-13-2011, 02:28 AM

Frank- I will throw in the knobs for $10 for a total of $60 Shipped with the belts. PM sent.

Fesser · 06-13-2011, 10:22 AM

Done. You should see funds shortly via Paypal. Thanks.

**leddzepp** · 06-16-2011, 01:44 PM

Seatbelts and Deluxe radio knobs sold/shipped to Fesser, prices lowered on parts lots. Trim sold locally. Everything else still available.

ricks71pu · 06-16-2011, 03:12 PM

snap. how much for green armreset to 97301? been looking all over!

Fesser · 06-16-2011, 09:21 PM

Zepp, got my stuff today. Very nice. Thanks. Frank

**zicc1835** · 06-17-2011, 12:04 AM

Can I get a price form center cap shipped to 07981 and payment info
Posted via Mobile Device

**michael bustamante** · 06-17-2011, 12:37 AM

can you do the 2 white 3/4 ton caps for 22 shipped?
Posted via Mobile Device

**leddzepp** · 06-17-2011, 12:17 PM

Quote:

Originally Posted by Fesser

Zepp, got my stuff today. Very nice. Thanks. Frank

Good deal, thanks Frank.

Quote:

Originally Posted by ricks71pu

snap. how much for green armreset to 97301? been looking all over!

$20 Shipped to you. It is as close to NOS as you will find.

Quote:

Originally Posted by zicc1835

Can I get a price form center cap shipped to 07981 and payment info
Posted via Mobile Device

$20 Shipped to you. $11 of that is shipping in a med. flat rate box. I posted the parts in lots to give better deals, but I guess I will split if nobody wants lots.

Quote:

Originally Posted by michael bustamante

can you do the 2 white 3/4 ton caps for 22 shipped?
Posted via Mobile Device

Sorry Michael, all 3 are 1/2 ton caps. I should have stated that in the original post

**leddzepp** · 06-18-2011, 02:15 AM

Green armrest is sold pending payment. Parts lot number two has now been reduced to $40 Shipped. Parts lot 5 is sold pending payment.

Indyuke · 06-18-2011, 11:22 AM

If Michael doesn't want the two white hubcaps, will you sell them for $25 shipped to 98270?

**michael bustamante** · 06-20-2011, 12:58 AM

I thought that 3/4 ton caps had 6 fingers while 1/2 tons had five? any chance you can measure the inner diameter? I need them to complete my set

Posted via Mobile Device

**leddzepp** · 06-20-2011, 01:41 AM

michael, i know for a fact they are half ton. they fit my 5 on 5 steelies. they are 10.5 inch diameter. again, sorry for the confusion.
Posted via Mobile Device

**leddzepp** · 06-20-2011, 02:34 AM

Quote:

Originally Posted by Indyuke

If Michael doesn't want the two white hubcaps, will you sell them for $25 shipped to 98270?

Best I can do is $30 Shipped. Thanks.

**michael bustamante** · 06-20-2011, 05:12 PM

ok man thank you but I need the larger diamaeter
Posted via Mobile Device

Indyuke · 06-20-2011, 09:32 PM

Quote:

Originally Posted by leddzepp

Best I can do is $30 Shipped. Thanks.

I can do that. PM sent.

06-12-2011, 03:19 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	67 Seatbelts, Parts lots, hubcaps, misc. for sale Clearing out some parts not needed in my build. First "I'll take it" gets it. 1. 67 Seatbelts. One belt is missing, but still have the buckle. There are also (3) 7/16 20 (fine thread) bolts included. The bolts fit the floor of 67 cabs, as well as the threaded pillars on all 67-72 trucks. $50 Shipped SOLD 2. Large parts lot. Includes pancake bumpstops, upper rear shock mounts for a coil sprung 2WD truck, deluxe wiper knob, a pair of door pillar plugs, driver OEM taillight lens, factory u-bolts for coil sprung trucks, console delete seatbelt holders, one new power steering pitman arm seal, woodgrain cab corner moulding, tilt column shifter from a van (shorter than truck, works well for smaller diameter steering wheels), glovebox button (small set screw is missing from the bracket), blue seat belt buckle with nice GM button, 67 ashtray, and all 3 emblems have intact studs and some have the nuts still attached. $40 Shipped 3. OEM starter from a 72 big block. It is an AC Delco, but has a Napa gold sticker on it, so is a reman. Worked in my truck, but have now upgraded to a mini starter and no longer need this one. Includes grade 8 mounting bolts. This is for a staggered mount. $35 Shipped 4. 3 Hubcaps. All are driver quality. All are for a 1/2 ton truck. $35 Shipped 5. One Rallye wheel center cap and Tailgate hinges/trunions/hardware. $30 Shipped SOLD pending payment 6. OEM headliner trim. Poor shape, the only unbroken pieces are the two front ones. Even they have some broken tabs on the backside. $25 Shipped SOLD LOCALLY Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 06-18-2011 at 02:13 AM.

06-12-2011, 03:22 AM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Mas fotos Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-12-2011, 10:07 AM	#3
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale I'll take the seat belts. Going back to look at the rest...

06-12-2011, 10:23 AM	#4
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale would love to have the radio knobs but don't need any of the rest of that lot. In case you break it up. Let me know how to pay for the belts. Frank

06-13-2011, 02:28 AM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Frank- I will throw in the knobs for $10 for a total of $60 Shipped with the belts. PM sent. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-13-2011, 10:22 AM	#6
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Done. You should see funds shortly via Paypal. Thanks.

06-16-2011, 01:44 PM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Seatbelts and Deluxe radio knobs sold/shipped to Fesser, prices lowered on parts lots. Trim sold locally. Everything else still available. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-16-2011, 03:12 PM	#8
ricks71pu Registered User Join Date: Feb 2010 Location: salem oregon Posts: 225	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale snap. how much for green armreset to 97301? been looking all over! __________________ In the words of my favorite poet, singer/songwriter (Paul Thorn):"What ever you believe, you might be wrong"

06-16-2011, 09:21 PM	#9
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Zepp, got my stuff today. Very nice. Thanks. Frank

06-17-2011, 12:04 AM	#10
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,400	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Can I get a price form center cap shipped to 07981 and payment info Posted via Mobile Device __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

06-17-2011, 12:37 AM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale can you do the 2 white 3/4 ton caps for 22 shipped? Posted via Mobile Device __________________ 1967custom Last edited by michael bustamante; 06-17-2011 at 12:39 AM.

06-18-2011, 02:15 AM	#13
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale Green armrest is sold pending payment. Parts lot number two has now been reduced to $40 Shipped. Parts lot 5 is sold pending payment. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-18-2011, 11:22 AM	#14
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale If Michael doesn't want the two white hubcaps, will you sell them for $25 shipped to 98270?

06-20-2011, 12:58 AM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale I thought that 3/4 ton caps had 6 fingers while 1/2 tons had five? any chance you can measure the inner diameter? I need them to complete my set Posted via Mobile Device __________________ 1967custom

06-20-2011, 01:41 AM	#16
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale michael, i know for a fact they are half ton. they fit my 5 on 5 steelies. they are 10.5 inch diameter. again, sorry for the confusion. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul



Register or Log In To remove these advertisements.

06-20-2011, 05:12 PM	#18
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 Seatbelts, Parts lots, hubcaps, misc. for sale ok man thank you but I need the larger diamaeter Posted via Mobile Device __________________ 1967custom

Register or Log In To remove these advertisements.