torque converter 350 to 383 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KyleL113 · 06-20-2011, 11:42 PM

will the torque converter off of my 350 fit onto a 383 with the same transmission?

Autoblueprint · 06-21-2011, 01:25 AM

Quote:

Originally Posted by KyleL113

will the torque converter off of my 350 fit onto a 383 with the same transmission?

Doing a swap from a 350 c.i.d. to a 383 c.i.d. engine, you should be able to use your existing 350 TurboHydramatic automatic transmission torque converter...however...you MIGHT need to change the flexplate so the converter can bolt up.

Check out PHOTO M 27 on my technical page:

Technical_Information_PageFive.html

Longhorn Man · 06-21-2011, 08:52 AM

be carefull swapping flexplates. If your 383 is made from old GM parts (ie, 400 crank) then you'll have a 400 specific flexplate and putting a non 400 unit on there will throw the engine out of ballance

06-20-2011, 11:42 PM	#1
KyleL113 Registered User Join Date: May 2011 Location: Dallas Texas Posts: 12	torque converter 350 to 383 will the torque converter off of my 350 fit onto a 383 with the same transmission?

06-21-2011, 08:52 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: torque converter 350 to 383 be carefull swapping flexplates. If your 383 is made from old GM parts (ie, 400 crank) then you'll have a 400 specific flexplate and putting a non 400 unit on there will throw the engine out of ballance



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.