The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-21-2011, 03:59 PM   #1
ratty65
Registered User
 
Join Date: May 2010
Location: Mundelein
Posts: 99
Normal oil pressure reading on a BBC Dually?

So just have a quick question. What is the normal operating range for the oil pressure on a 454 bbc? This engine is in a 1987 GMC DRW. the engine is supposed to be bored .030 over and has an Edelbrock carb with Edelbrock peformer 2.0 intake. Also what is the normal operating temp? right now it seems to run around 210 or so and when stopped these last few days in 90 defgree weather it gets up to about 215 or 220 but i get no boilover at all. Is this normal?
ratty65 is offline   Reply With Quote
Old 06-21-2011, 04:12 PM   #2
Cherub
Registered User
 
Cherub's Avatar
 
Join Date: Feb 2008
Location: Houston
Posts: 970
Re: Normal oil pressure reading on a BBC Dually?

humm that seems kinda high. i get around 50 psi on oil and 190 on temp
Cherub is offline   Reply With Quote
Old 06-21-2011, 04:29 PM   #3
ratty65
Registered User
 
Join Date: May 2010
Location: Mundelein
Posts: 99
Re: Normal oil pressure reading on a BBC Dually?

I get around 25 at idle and at start up around 75. I wonder if I need to burp my cooling system or possibly get a cooler thermostat
ratty65 is offline   Reply With Quote
Old 06-21-2011, 04:50 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,964
Re: Normal oil pressure reading on a BBC Dually?

I would typically have about 40psi @ start-up & 50-60psi @ speed. For temp it would be between 180-195°F.

I've been struggling w/cooling issues since March though. It appears I had a head gasket seeping into the engine on the exhaust side so the water level would drop w/o external indicators. Recently (Friday night), it would appear to have breached into the crank-case side as my oil pressure was diluted to near zero & the motor siezed. Working on swapping it out as I write this....

I would make sure your radiator is fresh as well as replace your hoses & t-stat.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 06-21-2011, 05:21 PM   #5
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Normal oil pressure reading on a BBC Dually?

In my 83 C20 BB 454 I normally show 40-50 psi oil pressure, pretty much constant in that range. Temperature is 180-190 degrees - never goes over 200 degrees, even in 115 degree ambient desert heat. I just have a Goodwrench rebuilt 454 with slight bore over from GM (forget how much) and stock Qjet - totally stock setup with Ready Rad thicker 3 core radiator (about the thickness of a 4 core) with stock engine oil cooler. I have had more cooling issues with my small block 350 than the two 454 squares I have owned. It has a factory 7 quart oil pan. I did have a slight external leak at the front of the intake manifold but some stop leak tablets seems to have stopped that, and it never caused overheating, just a little coolant loss.
tucsonjwt is offline   Reply With Quote
Old 06-21-2011, 07:46 PM   #6
Goldfinger
Registered User
 
Goldfinger's Avatar
 
Join Date: May 2010
Location: laurel hill Fl
Posts: 645
Re: Normal oil pressure reading on a BBC Dually?

My 85 runs 30 at idle 45 at highways but with the overdrive gear i don't see very high rpm's if i dog it i get 60+. Mine never gets above 160 tempature wise
__________________
1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ]

1999 k3500 crew cab dually 6.5tdi/4l80e

Last edited by Goldfinger; 06-21-2011 at 07:47 PM.
Goldfinger is offline   Reply With Quote
Old 06-22-2011, 12:04 AM   #7
jimbonice
Registered User
 
jimbonice's Avatar
 
Join Date: Aug 2010
Location: White City, SK
Posts: 411
Re: Normal oil pressure reading on a BBC Dually?

My '77 in the sig is 50 plus pounds on start up, 25 at idle hot. It runs 180 with a 180 thermostat and 195 with a 195 thermostat. It never waivers much from there.
jimbonice is offline   Reply With Quote
Old 06-22-2011, 09:07 AM   #8
jonessmc87
Registered User
 
jonessmc87's Avatar
 
Join Date: Jan 2008
Location: Old Saybrook, CT
Posts: 61
Re: Normal oil pressure reading on a BBC Dually?

In my 89, it came with a 210 thermostat. she would sit at 210 all day long on the highway, then in heavy traffic, it would creep to 220. it would smell hot all the time, but it never gave me any issues. that being said, I didnt like that one bit so i swapped in a 180 thermostat, and now she runs a 180 all the time and never gets above 190 no matter what im doin to it. as far as oil pressure, i run 50psi or so at start up. hot idle is right around 15 psi, and hot driving at 2100 rpm on the highway is about 22 psi
__________________
1989 V3500 nv4500/np205 255-85-16 BFG Mud Terrains, 4inch skyjacker kit, 2 inch body lift.

"Yea, it was a fuel supply problem. A rod came through the block and cut the fuel line."
jonessmc87 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com