Anyone ever double up the cork valve pan gaskets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

abebummy26 · 06-23-2011, 10:16 PM

Another thing that you could check is to see if there is a burr on the gasket surface, of the head.

lbrowne · 06-23-2011, 10:38 PM

Quote:

Originally Posted by abebummy26

Another thing that you could check is to see if there is a burr on the gasket surface, of the head.

It's got to be the valve cover, it leaked before the new heads and after the new heads. It should be coming off this weekend.

INSIDIOUS '86 · 06-24-2011, 12:58 AM

WHY is it ALWAYS the drivers side that leaks?

motornut · 06-24-2011, 06:15 AM

Quote:

Originally Posted by INSIDIOUS '86

WHY is it ALWAYS the drivers side that leaks?

i've seen it at the back on the pass side where the ground strap goes
they get turned up and stop the VC from going down

06-23-2011, 10:16 PM	#1
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Anyone ever double up the cork valve pan gaskets? Another thing that you could check is to see if there is a burr on the gasket surface, of the head. __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

06-24-2011, 12:58 AM	#3
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Anyone ever double up the cork valve pan gaskets? WHY is it ALWAYS the drivers side that leaks? __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511



Register or Log In To remove these advertisements.