which is the right tap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vasquezmrysvll · 06-29-2011, 03:41 PM

im going to drill and tap my vortec heads to accept the stock temp sender. what is the correct tap needed?

Tx Firefighter · 06-29-2011, 04:53 PM

1/2 npt

jamesi20 · 06-29-2011, 05:30 PM

If you want to do it properly,try to get a tapered reamer for the hole you drill,as it will make for a lot nicer job.

06-29-2011, 03:41 PM	#1
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	which is the right tap? im going to drill and tap my vortec heads to accept the stock temp sender. what is the correct tap needed? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

06-29-2011, 04:53 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: which is the right tap? 1/2 npt __________________ I'm on the Instagram- @Gearhead_Kevin

06-29-2011, 05:30 PM	#3
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: which is the right tap? If you want to do it properly,try to get a tapered reamer for the hole you drill,as it will make for a lot nicer job.



Register or Log In To remove these advertisements.