VA rust free dent free orig. 68/72 step bed fenders f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-24-2011, 05:11 PM

only rust is some surface at bottom of fenders not bad $700.00 obo. this is the best orig. pair of used fenders i have run across.

billsbowtie · 06-24-2011, 05:14 PM

billsbowtie · 06-24-2011, 05:15 PM

billsbowtie · 06-24-2011, 05:16 PM

billsbowtie · 06-28-2011, 11:53 PM

it would be hard to find a nicer pair of orig, fenders like these. someone make me a good reasonable offer on these things before they get damaged laying around.

**special-K** · 06-29-2011, 06:55 AM

They're worth every penny compared to repro.

billsbowtie · 06-29-2011, 01:25 PM

thanks tim

wiggins · 06-29-2011, 01:39 PM

Repaint? any body work?

billsbowtie · 06-29-2011, 05:38 PM

i can't see any body work on them inside or outside. looks like orig. paint to me.
i thought about sanding them down and prime them and under coat them under neith they would look alot better. but i would rather see them orig. if i was buying them.

wiggins · 06-29-2011, 05:45 PM

any idea on shipping to 75956?

billsbowtie · 06-29-2011, 05:51 PM

wiggins i would say grayhound about $70.00 each.

wiggins · 06-29-2011, 06:03 PM

would you consider $550 plus shipping?

billsbowtie · 06-29-2011, 11:32 PM

would you do $700.00 that would be $20.00 more if so i will look them over again and try to find some big boxes. i will be gone from noon thursday till late sat. nite. i will get back with you then. bill

wiggins · 06-30-2011, 10:20 AM

sure if you are positive they are originals and not just old repop's. Dont mean to ? you they just look to nice. You are taliking $700 shipped correct?

billsbowtie · 06-30-2011, 01:24 PM

$700.00 shipped to you is corect. i looked them over again they look orig. to me . the guy i got them from has had them hanging in his grarge for the last 10 years because i have been trying to buy his truck for that long. he took them off of a old bed setting out in a hay field for who knows how long. i did see some olive green paint undeer the black so they have ben painted atleast once but i steal didn't see and body work [bondo] or dents.

wiggins · 06-30-2011, 02:03 PM

I'll take em. I thought I saw another color paint in the mix. Whats your Paypal?

billsbowtie · 07-01-2011, 01:54 PM

wiggins sending pm

06-24-2011, 05:11 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	rust free dent free orig. 68/72 step bed fenders f/s only rust is some surface at bottom of fenders not bad $700.00 obo. this is the best orig. pair of used fenders i have run across. __________________ i have 67/72 chevy truck parts f/s.

06-24-2011, 05:14 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s __________________ i have 67/72 chevy truck parts f/s.

06-24-2011, 05:15 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s __________________ i have 67/72 chevy truck parts f/s.

06-24-2011, 05:16 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s __________________ i have 67/72 chevy truck parts f/s.

06-28-2011, 11:53 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s it would be hard to find a nicer pair of orig, fenders like these. someone make me a good reasonable offer on these things before they get damaged laying around. __________________ i have 67/72 chevy truck parts f/s.

06-29-2011, 06:55 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: rust free dent free orig. 68/72 step bed fenders f/s They're worth every penny compared to repro. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-29-2011, 01:25 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s thanks tim __________________ i have 67/72 chevy truck parts f/s.

06-29-2011, 01:39 PM	#8
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: rust free dent free orig. 68/72 step bed fenders f/s Repaint? any body work? __________________ Preserving American History one truck at a time.

06-29-2011, 05:38 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s i can't see any body work on them inside or outside. looks like orig. paint to me. i thought about sanding them down and prime them and under coat them under neith they would look alot better. but i would rather see them orig. if i was buying them. __________________ i have 67/72 chevy truck parts f/s.

06-29-2011, 05:45 PM	#10
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: rust free dent free orig. 68/72 step bed fenders f/s any idea on shipping to 75956? __________________ Preserving American History one truck at a time.

06-29-2011, 05:51 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s wiggins i would say grayhound about $70.00 each. __________________ i have 67/72 chevy truck parts f/s.

06-29-2011, 06:03 PM	#12
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: rust free dent free orig. 68/72 step bed fenders f/s would you consider $550 plus shipping? __________________ Preserving American History one truck at a time.

06-29-2011, 11:32 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s would you do $700.00 that would be $20.00 more if so i will look them over again and try to find some big boxes. i will be gone from noon thursday till late sat. nite. i will get back with you then. bill __________________ i have 67/72 chevy truck parts f/s.

06-30-2011, 10:20 AM	#14
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: rust free dent free orig. 68/72 step bed fenders f/s sure if you are positive they are originals and not just old repop's. Dont mean to ? you they just look to nice. You are taliking $700 shipped correct? __________________ Preserving American History one truck at a time.

06-30-2011, 01:24 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s $700.00 shipped to you is corect. i looked them over again they look orig. to me . the guy i got them from has had them hanging in his grarge for the last 10 years because i have been trying to buy his truck for that long. he took them off of a old bed setting out in a hay field for who knows how long. i did see some olive green paint undeer the black so they have ben painted atleast once but i steal didn't see and body work [bondo] or dents. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

06-30-2011, 02:03 PM	#16
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: rust free dent free orig. 68/72 step bed fenders f/s I'll take em. I thought I saw another color paint in the mix. Whats your Paypal? __________________ Preserving American History one truck at a time.

07-01-2011, 01:54 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: rust free dent free orig. 68/72 step bed fenders f/s wiggins sending pm __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.