1977 chevy c60 i want to no what wheel base's they had / chassis length's

[towieguy]

1977 chev c60 i want to no what wheel base's they had / chassis length what sizes they came out in thanks


im in the land downunder and im building up a c60 1977 with a 2006 gmc cab on it but im wanting a very long tray so i need to no what was the longest they came out with so i can do the job for rego, thanks guys

[C-10 simplex]

Can't guarantee any pertinent info, but give me a few hours, possibly days, weeks etc.

[MadManAndrew]

I can't offer any help, but you've sparked my curiosity. Most people put old bodys on new frames, better suspension, durability, technology compatibility...So why a new cab on an old chassis?
Posted via Mobile Device

[towieguy]

well here in australia we only have old c60 / c50's that are built / sold here we can not import new chevys 88 only foe us to get a 2005 gmc here cost the car + shipping + import + 40k to get it changed to rh drive , not worth it
so ezy to rego a c60 truck with a new rollback then fit a cab off a 05 gmc gives me a new looking tow truck but i want it as long as i can

[MadManAndrew]

Oh, I see. So what's the major truck manufacturer there?
Posted via Mobile Device

[GM72K10]

Originally Posted by towieguy

1977 chev c60 i want to no what wheel base's they had / chassis length what sizes they came out in thanks


im in the land downunder and im building up a c60 1977 with a 2006 gmc cab on it but im wanting a very long tray so i need to no what was the longest they came out with so i can do the job for rego, thanks guys

Wheelbases ranged from 125 to 254 for single axle and 149 to 226 for tandem. If you want tomorrow I can scan the page and post if for you
GM

[towieguy]

Originally Posted by GM72K10

Wheelbases ranged from 125 to 254 for single axle and 149 to 226 for tandem. If you want tomorrow I can scan the page and post if for you
GM

I'd love that thank you very much ,

as for what we have here what we call a "truck" is a hino isuzu sterling inter , mack kennworth etc

what you call a truck we call a ute holden (gm) ford toyota mazda but thay are not the same as your cars

we have gmc mustang , etc but ther all imported but it costs like 40K ontop of the car cost not worth it for a norm car,

we can import 1988 back cheap and anything 30 yeas old we can drive lh drive

[GM72K10]

This is from the 82 book which should be similar. I have the specs somewhere for the Brigadier Bison General etc series also if you want but these are for the conventional cab.
Good Luck

[towieguy]

thanks for that any chance you can scan the top bit only its a bit hard to read

i only need the single axle part thanks mate

[Edahall]

Originally Posted by towieguy

thanks for that any chance you can scan the top bit only its a bit hard to read

i only need the single axle part thanks mate

Try saving the image file and reopening it in a program that you can enlarge it. I did this and could read everything.

[towieguy]

i did that too but its going fuzy

[GM72K10]

One from the 1978 books