![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
chevy only
![]() Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
|
Re: Project '64 C-10 Truck - built in Germany
__________________
CHEVY ONLY... Nothin Else ! |
![]() |
![]() |
![]() |
#2 |
chevy only
![]() Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
|
Re: Project '64 C-10 Truck - built in Germany
fabian thats sucks sorry kat
__________________
CHEVY ONLY... Nothin Else ! |
![]() |
![]() |
![]() |
#3 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Project '64 C-10 Truck - built in Germany
Well that does suck. I would be talking to the primer mfg and or the supplier.
I do know that if you were using PPG primer, and it was bad primer, they will pay to have your cab re-blasted. But I see you said you were using HOK Epoxy primer, and I don't know about their policies. I thought there were some very good paints made in Germany? Did your blaster use soda on the cab at all? If so that could be the issue. Everything I have heard about the after effects of soda blasting is not good. There are a few paint mfg's that will not guarantee their paint if it is applied over a soda blasted surface. PPG is one of them. I will never have anything soda blasted. There are better medias available.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 07-03-2011 at 01:10 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|