Do you have c20 or k10 bare frame and tape? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

North Coast · 07-03-2011, 12:16 PM

i need to know how far below the top of the frame rails the 1971 k10 rear cab mounts sit. if someone could put a straight edge across the frame rails and measure the drop for me it would be much appreciated.

Booya · 07-03-2011, 12:53 PM

I believe it should be the same as the 72, here is a previouse link.
http://67-72chevytrucks.com/vboard/s...d.php?t=448427

North Coast · 07-03-2011, 01:14 PM

thanks!
im putting a new floor in the truck and just wanted to make sure the foundation was correct.

07-03-2011, 12:16 PM	#1
North Coast Registered User Join Date: Jun 2011 Location: St. Louis County, MN Posts: 7	Do you have c20 or k10 bare frame and tape? i need to know how far below the top of the frame rails the 1971 k10 rear cab mounts sit. if someone could put a straight edge across the frame rails and measure the drop for me it would be much appreciated.

07-03-2011, 12:53 PM	#2
Booya Registered User Join Date: Jun 2008 Location: Boise Idaho Posts: 117	Re: Do you have c20 or k10 bare frame and tape? I believe it should be the same as the 72, here is a previouse link. http://67-72chevytrucks.com/vboard/s...d.php?t=448427

07-03-2011, 01:14 PM	#3
North Coast Registered User Join Date: Jun 2011 Location: St. Louis County, MN Posts: 7	Re: Do you have c20 or k10 bare frame and tape? thanks! im putting a new floor in the truck and just wanted to make sure the foundation was correct.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.